MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, Downsized, 105℃
LZASeries
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
RoHS2 Compliant
LZA
Adoption of innovative electrolyte and new technologies
Very low impedance at high frequency
Endurance with ripple current: 4,000 to 7,000 hours at 105
・
・
・
・
・
・
Lower Z
Downsized
℃
LXZ
AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
SPECIFICATIONS
◆
Items
Characteristics
Category
Temperature Range
-55 to +105
℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
6.3 to 35Vdc
20% (M)
(at 20 , 120Hz)
±
℃
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20 after 2 minutes)
℃
Dissipation Factor
Rated voltage (Vdc
tan (Max.)
)
6.3V 10V 16V 25V 35V
0.22 0.19 0.16 0.14 0.12
(tan
)
δ
δ
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
Rated voltage (Vdc 6.3V 10V 16V 25V 35V
Z(-55 )/Z(+20
(at 20 , 120Hz)
℃
Low Temperature
Characteristics
(Max. Impedance Ratio)
)
)
℃
4
3
3
3
3
℃
(at 120Hz)
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated
℃
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105
.
℃
Time
10 : 4,000hoursꢀ 12.5 : 5,000hoursꢀ 16 to 18 : 7,000hours
φ φ φ
φ
Rated voltage
Capacitance change
6.3 to 10Vdc
(
10)
6.3 to 10Vdc
(
12.5 to 18)
16 to 35Vdc
20% of the initial value
≦±
φ
φ
φ
30% of the initial value
20% of the initial value
≦±
≦±
D.F.(tan
Leakage current
)
300% of the initial specified value
200% of the initial specified value
200% of the initial specified value
δ
≦
≦
≦
≦
≦
≦
The initial specified value
The initial specified value
The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without
℃
℃
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Rated voltage
Capacitance change
6.3 to 10Vdc
(
10)
6.3 to 10Vdc
(
12.5 to 18)
16 to 35Vdc
20% of the initial value
≦±
φ
φ
φ
30% of the initial value
20% of the initial value
≦±
≦±
D.F.(tan
Leakage current
)
300% of the initial specified value 200% of the initial specified value 200% of the initial specified value
δ
≦
≦
≦
≦
The initial specified value
The initial specified value
The initial specified value
≦
≦
DIMENSIONS [mm]
Terminal Code : E
◆
●
Sleeve (PET : Dark blue)
φD
φd
F
10
0.6
5.0
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
φD'
L'
φD+0.5max.
L+1.5max.
L'
15min.
4min.
(φ10)
(φ12.5 toφ18)
Gas escape end seal
Vent
PART NUMBERING SYSTEM
◆
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E L Z A A A A E A A A A A M A A A S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 680µF:681, 2,200µF:222)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 25V:250)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001Y 2024