5秒后页面跳转
ELN-60_12 PDF预览

ELN-60_12

更新时间: 2024-11-09 10:08:07
品牌 Logo 应用领域
明纬 - MEANWELL 开关
页数 文件大小 规格书
3页 185K
描述
60W Single Output Class 2 Switching Power Supply

ELN-60_12 数据手册

 浏览型号ELN-60_12的Datasheet PDF文件第2页浏览型号ELN-60_12的Datasheet PDF文件第3页 
60W Single Output Class 2 Switching Power Supply  
ELN-60 series  
Features :  
Universal AC input / Full range  
Protections: Short circuit / Over current / Over voltage  
Cooling by free air convection  
Built-in constant current limiting circuit with adjustable OCP level  
Optional dimming function : 1~10VDC (D type) or PWM (P type) controlled  
Fully isolated plastic case with IP64 level  
Class  
power unit, no FG  
Class 2 power unit  
Pass LPS  
Suitable for LED lighting and moving sign applications (Note.9)  
100% full load burn-in test  
Low cost, high reliability  
2 years warranty  
IP64  
( for 48V only)  
( except for 48V )  
LPS  
SPECIFICATION  
MODEL  
ELN-60-9  
ELN-60-12  
ELN-60-15  
ELN-60-24  
ELN-60-27  
ELN-60-48  
DC VOLTAGE  
9V  
12V  
15V  
24V  
27V  
48V  
LED OPERATION VOLTAGE Note.8 3 ~ 9V  
6 ~ 12V  
5A  
7.5 ~ 15V  
4A  
12 ~ 24V  
2.5A  
13.5 ~ 27V  
2.3A  
24 ~ 48V  
1.3A  
RATED CURRENT  
CURRENT RANGE  
RATED POWER  
5A  
0 ~ 5A  
45W  
0 ~ 5A  
60W  
0 ~ 4A  
0 ~ 2.5A  
60W  
0 ~ 2.3A  
62.1W  
0 ~ 1.3A  
62.5W  
60W  
RIPPLE & NOISE (max.) Note.2 120mVp-p  
120mVp-p  
10.8 ~ 13.2V  
150mVp-p  
13.5 ~ 16.5V  
150mVp-p  
21.6 ~ 26.4V  
200mVp-p  
24.3 ~ 29.7V  
250mVp-p  
43.2 ~ 52.8V  
8.7 ~ 10.5V  
OUTPUT  
VOLTAGE ADJ. RANGE Note.7  
Can be adjusted by internal potentiometer SVR1  
CURRENT ADJ. RANGE Note.7 -25% ~ 3%. Can be adjusted by internal potentiometer SVR2  
VOLTAGE TOLERANCE Note.3 5.0%  
LINE REGULATION  
LOAD REGULATION  
SETUP, RISE TIME  
1.0%  
2.0%  
Note.6 500ms, 30ms / 230VAC 1500ms, 30ms / 115VAC at full load  
HOLD UP TIME (Typ.)  
VOLTAGE RANGE  
50ms/230VAC  
Note.4 90 ~ 264VAC  
47 ~ 63Hz  
16ms/115VAC at full load  
127 ~ 370VDC  
FREQUENCY RANGE  
EFFICIENCY (Typ.)  
AC CURRENT (Typ.)  
INRUSH CURRENT (max.)  
LEAKAGE CURRENT  
82%  
85%  
86%  
87%  
87%  
88%  
INPUT  
1.2A/115VAC 0.7A/230VAC  
COLD START 60A/230VAC  
0.25mA / 240VAC  
95 ~ 110%  
OVER CURRENT  
OVER VOLTAGE  
Protection type : Constant current limiting, recovers automatically after fault condition is removed  
11 ~ 13.5V 13.8 ~ 16V 17.5 ~ 21V 28 ~ 32V 31 ~ 35V  
PROTECTION  
54 ~ 60V  
Protection type : Shut down o/p voltage, re-power on to recover  
1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz  
-20 ~ +60 (Refer to "Derating Curve")  
20 ~ 90% RH non-condensing  
FUNCTION DIMMING CONTROL (OPTIONAL)  
WORKING TEMP.  
WORKING HUMIDITY  
-40 ~ +80 , 10 ~ 95% RH  
STORAGE TEMP., HUMIDITY  
TEMP. COEFFICIENT  
VIBRATION  
ENVIRONMENT  
0.03%/ (0 ~ 50  
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes  
SAFETY STANDARDS  
WITHSTAND VOLTAGE  
ISOLATION RESISTANCE  
EMC EMISSION  
UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1  
I/P-O/P:3KVAC  
SAFETY &  
EMC  
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH  
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3  
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A  
EMC IMMUNITY  
MTBF  
603Khrs min. MIL-HDBK-217F (25  
181*61.5*35mm (L*W*H)  
)
OTHERS  
NOTE  
DIMENSION  
PACKING  
0.4Kg; 24pcs/11Kg/0.75CUFT  
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.  
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  
3. Tolerance : includes set up tolerance, line regulation and load regulation.  
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.  
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the  
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.  
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.  
7. Output voltage can be adjusted through the SVR1 on the PCB ; limit of output constant current level can be adjusted through the SVR2 on the PCB.  
8. Constant current operation region is within the specified output voltage range above. This is the suitable operation region for LED related applications.  
9. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.  
File Name:ELN-60-SPEC 2012-03-20  

与ELN-60_12相关器件

型号 品牌 获取价格 描述 数据表
ELN-60-12 MEANWELL

获取价格

60W Single Output Class 2 Switching Power Supply
ELN-60-15 MEANWELL

获取价格

60W Single Output Class 2 Switching Power Supply
ELN-60-24 MEANWELL

获取价格

60W Single Output Class 2 Switching Power Supply
ELN-60-27 MEANWELL

获取价格

60W Single Output Class 2 Switching Power Supply
ELN-60-48 MEANWELL

获取价格

60W Single Output Class 2 Switching Power Supply
ELN-60-9 MEANWELL

获取价格

60W Single Output Class 2 Switching Power Supply
ELONGNOSE ETC

获取价格

Tools for Telecom, Fiber Optics, CATV, Satellite, Security & Alarm, Wireless and Electroni
ELP HAMMOND

获取价格

Electronic Locking Handle with Proximity
ELP-02V JST

获取价格

高密度EL连接器的端子可以很容易地插入连接器外壳。采取针对接插时的防撬插入也可以进行平滑接
ELP-03V JST

获取价格

高密度EL连接器的端子可以很容易地插入连接器外壳。采取针对接插时的防撬插入也可以进行平滑接