ELM92xxxx CMOS 600kHz High output current PWM step-up DC/DC converter
http://www.elm-tech.com
■General description
ELM92xxxx is CMOS PWM step-up DC/DC converter which consists of reference voltage source, error
amplifier, oscillation circuit, start-up circuit, output voltage setting resistor, LX transistor and switching current
limiter. For external parts, coil, diode and capacitor are possible choices; with external parts, ELM92 series is
able to acquire constant output voltage higher than input voltage. The standard output voltages are 2.7V, 3.0V,
3.3V, and 5.0V; ELM92 series can also be designed as semi-custom IC within the range of 2.5V to 5.5V by 0.1V
step. Meanwhile, 600kHz high frequency PWM control scheme makes it easy to design DC/DC converter which
can generate large output current with high stability and small ripples by only using small external inductor.
With newly developed intermittent operation control scheme, ELM92 series is able to work with high efficiency
under wide range of load conditions.
■Features
■Application
• Output voltage range : 2.5V to 5.5V (by 0.1V)
• Low voltage operation : Vin≥0.9V
• Oscillating frequency : Typ.600kHz
• Output current(e.g.) : 250mA(Vin=1.5V, Vout=3.0V)
• CE(Chip-enable pin) available
• Constant voltage source for
battery-operated devices
• Constant voltage source for PDAs,
cameras, portable communications
equipments and videos
: Max.0.5μA(ELM92xx2x Iss at shutdown)
: Typ.85%
• Switching current limiter
• Local regulator
• High efficiency
• Package
: SOT-89, SOT-89-5
■Maximum absolute ratings
Parameter
Apply voltage to LX pin
Apply voltage to VOUT pin
Apply voltage to CE pin
Symbol
Vlx
Vout
Vce
Limit
Unit
V
V
Vss-0.3 to 8.0
Vss-0.3 to 8.0
Vss-0.3 to 8.0
500 (SOT-89)
500 (SOT-89-5)
-40 to +85
V
Power dissipation
Pd
mW
Operating temperature
Storage temperature
Top
Tstg
°C
°C
-55 to +125
■Selection guide
ELM92xxxx-x
Symbol
e.g. :
a, b
Output voltage
27: Vout=2.7V
33: Vout=3.3V
30: Vout=3.0V
50: Vout=5.0V
ELM92 x x x x - x
1: No CE type (SOT-89)
2: CE type (SOT-89-5)
B: SOT-89, SOT-89-5
S: Refer to PKG file
N: Refer to PKG file
↑ ↑ ↑ ↑
↑
e
c
d
e
CE selection
Package
a b c d
Taping direction
Rev.1.0
14 - 1