ELM626
RS232 Break Detector
Description
Features
The ELM626 is a complete circuit for detecting
• Low power CMOS design - typically 1mA at 5V
• No external timing elements required
• Complementary outputs
break signals on RS232 lines, in an 8 pin package.
The circuit is similar to the ELM627 except that an
output pulse is not generated on power-up.
The threshold for break signal detection is user
selectable, allowing the circuit to respond to a
transmitted null character, <ctrl>@, at various baud
rates. This provides a convenient means for the
remote triggering of this circuit by simply shifting to a
lower baud rate and sending a null byte.
• Digitally controlled threshold timing
• Selectable output duration
• High current drive outputs - up to 25 mA
Two complementary high current outputs are
provided by the ELM626, so that further buffering is
not usually required. The output signal can be
selected to be either a continuous one (following the
TxD input line) or else a 100ms pulse output.
Connection Diagram
PDIP and SOIC
(top view)
No external components are required for circuit
operation other than possibly a current limiting
resistor, as all timing references are generated
internally.
1
2
3
4
8
7
6
5
VDD
Q
VSS
T0
Q
T1
Applications
P/C
TxD
• Remote resetting of RS232 devices
• Edge triggered one-shot circuits
• Digitally controlled sequencing schemes
• Watchdog type signal monitors
Block Diagram
TxD
5
Output
Logic
Programmable
Timer
2
Q
4
7
3
6
Q
T1
T0
P/C
ELM626DSA
Elm Electronics – Circuits for the Hobbyist
1 of 4
< http://www.elmelectronics.com/ >