5秒后页面跳转
EL1508CM PDF预览

EL1508CM

更新时间: 2024-01-05 23:54:14
品牌 Logo 应用领域
ELANTEC 线路驱动器或接收器驱动程序和接口接口集成电路光电二极管
页数 文件大小 规格书
2页 141K
描述
Differential DSL Line Driver

EL1508CM 技术参数

是否Rohs认证: 符合生命周期:Obsolete
零件包装代码:SOIC包装说明:0.150 INCH, ROHS COMPLIANT, MS-012, SO-16
针数:16Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:5.59Is Samacsys:N
差分输出:NO驱动器位数:2
高电平输入电流最大值:0.000006 A输入特性:DIFFERENTIAL
接口集成电路类型:LINE DRIVER接口标准:GENERAL PURPOSE
JESD-30 代码:R-PDSO-G16JESD-609代码:e3
长度:9.9 mm湿度敏感等级:3
标称负供电电压:-12 V功能数量:2
端子数量:16最高工作温度:85 °C
最低工作温度:-40 °C最小输出摆幅:19.6 V
封装主体材料:PLASTIC/EPOXY封装代码:SOP
封装等效代码:SOP16,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE峰值回流温度(摄氏度):260
电源:+-12 V认证状态:Not Qualified
最大接收延迟:座面最大高度:1.75 mm
子类别:Line Driver or Receivers最大供电电压:12 V
最小供电电压:5 V标称供电电压:12 V
表面贴装:YES温度等级:INDUSTRIAL
端子面层:MATTE TIN端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
处于峰值回流温度下的最长时间:40宽度:3.9 mm
Base Number Matches:1

EL1508CM 数据手册

 浏览型号EL1508CM的Datasheet PDF文件第2页 
EL1508C - Product Brief  
Differential DSL Line Driver  
Features  
General Description  
• 450mA output drive capability  
• 43.6VP-P differential output drive  
into 100W  
• 2nd/3rd harmonics of -85dBc/  
-75dBc  
The EL1508C is designed for driving full rate ADSL signals in both  
CO and CPE applications at very low power dissipation. The high  
drive capability of 450mA makes this driver ideal for both CAP and  
DMT designs. It contains two wideband, high-voltage, current mode  
feedback amplifiers with a number of power dissipation reduction  
features.  
• MTPR of -70dB  
• Operates down to 3mA per  
amplifier supply current  
• Power control features  
These drivers achieve an MTPR distortion measurement of better than  
70dB, while consuming typically 6mA of total supply current. This  
supply current can be set using a resistor on the IADJ pin. Two other  
pins (C0 & C1) can also be used to adjust supply current to one of four  
pre-set modes (full-IS, 2/3-IS, 1/3-IS, and full power-down). The  
EL1508C operates on ±5V to ±12V supplies and retains its bandwidth  
and linearity over the complete supply range.  
• Pin-compatible with EL1503C  
Applications  
• ADSL line driver  
• HDSL line driver  
• Video distribution amplifier  
• Video twisted-pair line driver  
The device is supplied in a thermally-enhanced 20-pin SO (0.300”), a  
thermally-enhanced 16-pin SO (0.150”), and the small footprint  
(4x5mm) 24-pin LPP packages. The EL1508C is specified for opera-  
tion over the full -40°C to +85°C temperature range.  
Ordering Information  
Pin Configurations  
Part No  
EL1508CS  
EL1508CM  
EL1508CL  
Package  
Tape & Reel  
Outline #  
MDP0027  
MDP0027  
MDP0046  
16-Pin SO (0.150”)  
20-Pin SO (0.300")  
24-Pin LPP  
NC  
NC  
1
2
3
4
5
6
7
19 NC  
18 NC  
17 VS+  
16 NC  
15 NC  
14 NC  
13 GND  
VS-  
NC  
Thermal Pad  
NC  
NC  
GND  
24-Pin LPP Top View  
Pin Configurations continues on Page 3  
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these  
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.  
© 2001 Elantec Semiconductor, Inc.  

与EL1508CM相关器件

型号 品牌 描述 获取价格 数据表
EL1508CM-T13 INTERSIL Differential DSL Line Driver

获取价格

EL1508CMZ INTERSIL Differential DSL Line Driver

获取价格

EL1508CMZ-T13 INTERSIL Differential DSL Line Driver

获取价格

EL1508CS ELANTEC Differential DSL Line Driver

获取价格

EL1508CS INTERSIL Differential DSL Line Driver

获取价格

EL1508CS-T13 INTERSIL Differential DSL Line Driver

获取价格