EL9111, EL9112
®
Data Sheet
May 17, 2005
FN7450.1
Triple Differential Receiver/Equalizer
Features
• 150MHz -3dB bandwidth
The EL9111 and EL9112 are triple channel differential
receivers and equalizers. They contains three high speed
differential receivers with five programmable poles. The
outputs of these pole blocks are then summed into an output
buffer. The equalization length is set with the voltage on a
single pin. The EL9111 and EL9112 also contain a 3-statable
output, enabling multiple devices to be connected in parallel
and used in a multiplexing application.
• CAT-5 compensation
- 50MHz @ 1000 ft
- 125MHz @ 500 ft
• 108mA supply current
• Differential input range 3.2V
• Common mode input range -4V to +3.5V
• ±5V supply
The gain can be adjusted up or down on each channel by
6dB using its V
control signal. In addition, a further 6dB
GAIN
of gain can be switched in to provide a matched drive into a
cable.
• Output to within 1.5V of supplies
• Available in 28-pin QFN package
• Pb-free available (RoHS compliant)
The EL9111 and EL9112 have a bandwidth of 150MHz and
consume just 108mA on ±5V supply. A single input voltage is
used to set the compensation levels for the required length
of cable.
Applications
• Twisted-pair receiving/equalizer
• KVM (Keyboard/Video/Mouse)
• VGA over twisted-pair
• Security video
The EL9111 is a special version of the EL9112 that decodes
syncs encoded onto the common modes of three pairs of
CAT-5 cable by the EL4543. (Refer to the EL4543 datasheet
for details.)
The EL9111 and EL9112 are available in a 28-pin QFN
package and are specified for operation over the full -40°C to
+85°C temperature range.
Pinouts
EL9111
EL9112
(28-PIN QFN)
TOP VIEW
(28-PIN QFN)
TOP VIEW
VSMO_B
VOUT_B
VSPO_B
VSPO_G
VOUT_G
VSMO_G
VSMO_R
VOUT_R
1
2
3
4
5
6
7
8
22 VSP
VSMO_B
VOUT_B
VSPO_B
VSPO_G
VOUT_G
VSMO_G
VSMO_R
VOUT_R
1
2
3
4
5
6
7
8
22 VSP
21 VINM_B
20 VINP_B
19 VINM_G
18 VINP_G
17 VINM_R
16 VINP_R
15 VSM
21 VINM_B
20 VINP_B
19 VINM_G
18 VINP_G
17 VINM_R
16 VINP_R
15 VSM
THERMAL
PAD
THERMAL
PAD
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.