EL7155C
High-Performance Pin Driver
Features
General Description
• Clocking Speeds up to 40MHz
• 15ns tr/tf at 2000pF CLOAD
• 0.5ns Rise and Fall Times
Mismatch
The EL7155C high-performance pin driver with tri-state is suited to
many ATE and level-shifting applications. The 3.5A peak drive capa-
bility makes this part an excellent choice when driving high
capacitance loads.
• 0.5ns TON-TOFF Prop Delay
Mismatch
• 3.5pF Typical Input Capacitance
• 3.5A Peak Drive
• Low on Resistance of 3.5Ω
• High Capacitive Drive Capability
• Operates from 4.5V up to 18V
Output pins OUTH and OUTL are connected to input pins VH and VL
respectively, depending on the status of the IN pin. One of the output
pins is always in tri-state, except when the OE pin is active low, in
which case both outputs are in tri-state mode. The isolation of the out-
put FETs from the power supplies enables VH and VL to be set
independently, enabling level-shifting to be implemented.
This pin driver has improved performance over existing pin drivers. It
is specifically designed to operate at voltages down to 0V across the
switch elements while maintaining good speed and on-resistance
characteristics.
Applications
• ATE/Burn-in Testers
• Level Shifting
• IGBT Drivers
Available in the 8-Pin SOIC and 8-Pin PDIP packages, the EL7155C
is specified for operation over the -40°C to +85°C temperature range.
• CCD Drivers
Ordering Information
Pin Layout Diagram
Part No.
Package
Tape & Reel
Outline #
MDP0031
MDP0027
MDP0027
MDP0027
EL7155CN
8-Pin DIP
-
-
EL7155CS
8-Pin SOIC
8-Pin SOIC
8-Pin SOIC
EL7155CS-T7
EL7155CS-T13
7”
13”
V +
S
1
2
3
4
8
7
6
5
VH
L
o
g
i
OE
IN
OUTH
OUTL
VL
c
GND
8-Pin PDIP/SOIC
© 2000 Elantec Semiconductor, Inc.