EL2260C/EL2460C
Dual/Quad 130 MHz Current Feedback Amplifiers
Features
# 130 MHz 3 dB bandwidth
General Description
The EL2260C/EL2460C are dual/quad current feedback opera-
b
tional amplifiers with 3 dB bandwidth of 130 MHz at a gain
of 2. Built using the Elantec proprietary monolithic comple-
e a
(A
2)
V
a
# 180 MHz 3 dB bandwidth
mentary bipolar process, these amplifers use current mode feed-
back to achieve more bandwidth at a given gain than a conven-
tional voltage feedback operational amplifier.
e a
(A
1)
V
# 0.01% differential gain,
e
R
500X
L
# 0.01 differential phase,
§
The EL2260C/EL2460C are designed to drive a double termi-
nated 75X coax cable to video levels. Differential gain and
phase are excellent when driving both loads of 500X ( 0.01%/
e
R
500X
L
k
# Low supply current, 7.5 mA per
amplifier
k
0.01 ) and double terminated 75X cables (0.025%/0.1 ).
§
§
g
g
# Wide supply range, 2V to 15V
# 80 mA output current (peak)
# Low cost
The amplifiers can operate on any supply voltage from 4V
g
2V) to 33V ( 16.5V), yet consume only 7.5 mA per amplifier
g
(
at any supply voltage. Using industry standard pinouts, the
EL2260C is available in 8-pin P-DIP and 8-pin SO packages,
while the EL2460C is available in 14-pin P-DIP and 14-pin SO
packages.
# 1500 V/ms slew rate
# Input common mode range to
within 1.5V of supplies
# 35 ns settling time to 0.1%
Elantec’s facilities comply with MIL-I-45208A and offer appli-
cable quality specifications. For information on Elantec’s pro-
cessing, see the Elantec document, QRA-1: Elantec’s Process-
ingÐMonolithic Products.
Applications
# Video amplifiers
# Cable drivers
# RGB amplifiers
# Test equipment amplifiers
# Current to voltage converter
Connection Diagrams
EL2260C SO, P-DIP
Packages
EL2460C SO, P-DIP
Packages
Ordering Information
Ý
Outline
Part No.
Temp. Range
Package
b
a
40 C to 85 C 8-Pin P-DIP MDP0031
EL2260CN
EL2260CS
EL2460CN
EL2460CS
§
§
b
b
b
a
40 C to 85 C 8-Pin SOIC
MDP0027
§
§
a
40 C to 85 C 14-Pin P-DIP MDP0031
§
§
a
40 C to 85 C 14-Pin SOIC MDP0027
§
§
2260–1
Top View
2260–2
Top View
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a ‘‘controlled document’’. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
©
1992 Elantec, Inc.