EL2250C, EL2450C
125MHz Single Supply Dual/Quad Op Amps
Features
General Description
• Specified for +3V, +5V, or ±5V
applications
• Large input common mode range
0V < VCM < VS -1.2V
• Output swings to ground without
saturating
• -3dB bandwidth = 125MHz
• ± 0.1dB bandwidth = 30MHz
• Low supply current = 5mA (per
amplifier)
• Slew rate = 275V/µs
• Low offset voltage = 4mV max
• Output current = ±100mA
• High open loop gain = 80dB
• Differential gain = 0.05%
• Differential phase = 0.05°
The EL2250C/EL2450C are part of a family of the electronics indus-
tries fastest single supply op amps available. Prior single supply op
amps have generally been limited to bandwidths and slew rates to that
of the EL2250C/EL2450C. The 125MHz bandwidth, 275V/µs slew
rate, and 0.05%/0.05° differential gain/differential phase makes this
part ideal for single or dual supply video speed applications. With its
voltage feedback architecture, this amplifier can accept reactive feed-
back networks, allowing them to be used in analog filtering
applications. The inputs can sense signals below the bottom supply
rail and as high as 1.2V below the top rail. Connecting the load resistor
to ground and operating from a single supply, the outputs swing com-
pletely to ground without saturating. The outputs can also drive to
within 1.2V of the top rail. The EL2250C/EL2450C will output
±100mA and will operate with single supply voltages as low as 2.7V,
making them ideal for portable, low power applications.
The EL2250C/EL2450C are available in PDIP and SO packages in
industry standard pin outs. Both parts operate over the industrial tem-
perature range of -40°C to +85°C, and are part of a family of single
supply op amps. For single amplifier applications, see the
EL2150C/EL2157C. For dual and triple amplifiers with power down
and output voltage clamps, see the EL2257C/EL2357C.
Applications
• Video amplifiers
• PCMCIA applications
• A/D drivers
• Line drivers
• Portable computers
• High speed communications
• RGB printers, FAX, scanners
• Broadcast equipment
• Active filtering
Connection Diagrams
1
2
3
4
5
6
7
14
13
12
11
10
9
OUTA
INA-
OUTD
IND-
A
+
D
-
-
+
+
-
-
INA+
VS+
IND+
GND
INC+
INC-
Ordering Information
OUTA
INA-
1
2
3
4
8
7
6
5
VS+
Part No
Package
8-Pin PDIP
8-Pin SO
Tape & Reel
Outline #
MDP0031
MDP0027
MDP0027
MDP0027
MDP0031
MDP0027
MDP0027
MDP0027
EL2250CN
-
-
-
OUTB
INB-
INB+
INB-
EL2250CS
A
+
+
EL2250CS-T7
EL2250CS-T13
EL2450CN
8-Pin SO
7”
13”
-
INA+
GND
B
C
8-Pin SO
-
14-Pin PDIP
14-Pin SO
14-Pin SO
14-Pin SO
B
+
INB+
8
OUTB
OUTC
EL2450CS
-
EL2450CS-T7
EL2450CS-T13
7”
13”
EL2250C
(8-Pin SO & 8-Pin PDIP)
EL2450C
(14-Pin SO & 14-Pin PDIP)
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.