EL2245, EL2445
®
Data Sheet
March 27, 2002
FN7060
Dual/Quad Low-Power 100MHz Gain-of-2
Stable Op Amp
Features
• 100MHz gain-bandwidth
• Gain-of-2 stable
The EL2245 and EL2445 are dual and
quad versions of the popular EL2045.
• Low supply current (per amplifier) - 5.2mA at V = ±15V
S
They are high speed, low power, low
cost monolithic operational amplifiers built on Elantec's
proprietary complementary bipolar process. The EL2245
and EL2445 are gain-of-2 stable and feature a 275V/µs slew
rate and 100MHz bandwidth at gain-of-2 while requiring only
5.2mA of supply current per amplifier.
• Wide supply range - 2.5V to 36V
• High slew rate - 275V/µs
• Fast-settling - 80ns to 0.1% for a 10V step
• Low differential gain - 0.02% at A = +2, R = 150Ω
V
L
The power supply operating range of the EL2245 and
EL2445 is from ±18V down to as little as ±2V. For single-
supply operation, the EL2245 and EL2445 operate from 36V
down to as little as 2.5V. The excellent power supply
operating range of the EL2245 and EL2445 makes them an
obvious choice for applications on a single +5V or +3V
supply.
• Low differential phase - 0.07° at A = +2, R = 150Ω
V
L
• Wide output voltage swing - ±13.6V with V = ±15V,
S
R = 1kΩ
L
Applications
• Video amplifiers
The EL2245 and EL2445 also feature an extremely wide
• Single-supply amplifiers
• Active filters/integrators
• High speed signal processing
• ADC/DAC buffers
output voltage swing of ±13.6V with V = ±15V and
S
R = 1kΩ. At ±5V, output voltage swing is a wide ±3.8V with
L
R = 500Ω and ±3.2V with R = 150Ω. Furthermore, for
L
L
single-supply operation at +5V, output voltage swing is an
excellent 0.3V to 3.8V with R = 500Ω.
L
• Pulse/RF amplifiers
• Pin diode receivers
• Log amplifiers
At a gain of +2, the EL2245 and EL2445 have a -3dB
bandwidth of 100MHz with a phase margin of 50°. Because
of their conventional voltage-feedback topology, the EL2245
and EL2445 allow the use of reactive or non-linear elements
in their feedback network. This versatility combined with low
cost and 75mA of output-current drive make the EL2245 and
EL2445 an ideal choice for price-sensitive applications
requiring low power and high speed.
Ordering Information
TAPE &
REEL
PART NUMBER
EL2245CN
PACKAGE
8-Pin PDIP
PKG. NO.
MDP0031
MDP0027
MDP0027
MDP0027
MDP0031
MDP0027
MDP0027
MDP0027
-
-
EL2245CS
8-Pin SO
EL2245CS-T7
EL2245CS-T13
EL2445CN
8-Pin SO
7”
13”
-
8-Pin SO
14-Pin PDIP
EL2445CS
14-Pin SO (0.150")
14-Pin SO (0.150")
14-Pin SO (0.150")
-
EL2445CS-T7
EL2445CS-T13
7”
13”
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.