EL2126
®
Data Sheet
May 2, 2007
FN7046.4
Ultra-Low Noise, Low Power, Wideband
Amplifier
Features
• Voltage noise of only 1.3nV/√Hz
• Current noise of only 1.2pA/√Hz
• 200µV offset voltage
The EL2126 is an ultra-low noise, wideband amplifier that
runs on half the supply current of competitive parts. It is
intended for use in systems such as ultrasound imaging
where a very small signal needs to be amplified by a large
amount without adding significant noise. Its low power
dissipation enables it to be packaged in the tiny SOT-23
package, which further helps systems where many input
channels create both space and power dissipation problems.
• 100MHz -3dB BW for A = 10
V
• Very low supply current - 4.7mA
• SOT-23 package
• ±2.5V to ±15V operation
The EL2126 is stable for gains of 10 and greater and uses
traditional voltage feedback. This allows the use of reactive
elements in the feedback loop, a common requirement for
many filter topologies. It operates from ±2.5V to ±15V
supplies and is available in the 5 Ld SOT-23 and 8 Ld SO
packages.
• Pb-free plus anneal available (RoHS compliant)
Applications
• Ultrasound input amplifiers
• Wideband instrumentation
• Communication equipment
• AGC and PLL active filters
• Wideband sensors
The EL2126 is fabricated in Elantec’s proprietary
complementary bipolar process, and is specified for
operation over the full -40°C to +85°C temperature range.
Pinouts
EL2126
(5 LD SOT-23)
TOP VIEW
OUT
VS-
IN+
1
2
3
5
4
VS+
IN-
+
-
EL2126
(8 LD SOIC)
TOP VIEW
NC
IN-
1
2
3
4
8
7
6
5
NC
VS+
OUT
NC
-
+
IN+
VS-
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2005, 2007. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.