MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
160 to 450Vdc long life, 105C
KXJ
@Downsized and Longer life from current KXG series
@Endurance with ripple current : 10,000 to 12,000 hours at 105C
@Rated voltage range : 160 to 450V, Capacitance range : 6.8 to 680MF
@For electronic ballast circuits and other long life applications
@Non solvent resistant type
Downsized
KXG
@RoHS Compliant
SPECIFICATIONS
?
Items
Characteristics
Category
Temperature Range
40 to +105C (160 to 400Vdc)
-25 to +105C (420, 450Vdc)
Rated Voltage Range 160 to 450Vdc
Capacitance Tolerance P20% (M)
Leakage Current
(at 20C, 120Hz)
After 1 minute
After 5 minutes
CV[1000
I=0.1CV+40
I=0.03CV+15
I=0.02CV+25
CV>1000
I=0.04CV+100
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C)
Dissipation Factor
(tanE)
Rated voltage (Vdc)
tanE (Max.)
160 to 250V 350 to 450V
0.20
0.24
(at 20C, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc)
160 to 250V
350, 400V
420, 450V
6
Z(-25C)/Z(+20C)
3
6
5
6
Z(
-40C)/Z(+20C)
(at 120Hz)
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 12,000 hours (10,000 hours for 20L max.) at 105C.
Capacitance change
D.F. (tanE)
[P20% of the initial value
[200% of the initial specified value
[The initial specified value
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
D.F. (tanE)
[P20% of the initial value
[200% of the initial specified value
[500% of the initial specified value
Leakage current
DIMENSIONS [mm]
?
@Terminal Code : E
Sleeve (PET : Brown)
fD 10 12.5 14.5 16
18
fd 0.6 0.6 0.8 0.8 0.8
F
fD'
L'
5.0 5.0 7.5 7.5 7.5
FD+0.5max.
L'
15min.
4min.
Vent
L+1.5max.
(F10)
(F12.5 to F18)
Gas escaped end seal
PART NUMBERING SYSTEM
?
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E K X J A A A E A A A A A M A A A S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8MF:6R8,10MF:100,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 160V:161,400V:401)
Series code
Category
Please refer to "Product code guide (radial lead type)"
RATED RIPPLE CURRENT MULTIPLIERS
?
@Frequency Multipliers
Frequency (Hz)
Less than 100mF
100mF or more
120
1.00
1.00
1k
10k
2.25
2.05
100k
2.50
2.25
1.75
1.67
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise.
C
When long life performance is required in actual use, the rms ripple current has to be reduced.
CAT. No. E1001I
(1/3)