Ecliptek | EH56 Series Oscillator
http://www.ecliptek.com/oscillators/EH56/
Log On | 714-433-1200 | Email Customer Support
Home
Products
Quick Quote
My Parts List
Site Map
Contact Us
EH56 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 2.0mm x 2.5mm Ceramic Surface Mount (SMD)
2011/65 +
168 SVHC
2015/863
Revision J 04/28/2014
Electrical Specifications
Nominal Frequency
2.600MHz to 200.000MHz
Some frequencies within this range may not be available.
Frequency Tolerance/Stability
(Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency
Stability over the Operating Temperature Range, Supply Voltage
Change, Output Load Change, First Year Aging at 25°C, 260°C Reflow,
Shock, and Vibration)
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
Aging at 25°C
±5ppm/year Maximum
Operating Temperature Range
0°C to +70°C
-40°C to +85°C
Supply Voltage
Input Current
3.3V
±5%
DC
No Load
10mA Maximum over Nominal Frequency of 2.6MHz to 25MHz
12mA Maximum over Nominal Frequency of 25.000001MHz to 50MHz
13mA Maximum over Nominal Frequency of 50.000001MHz to 166MHz
16mA Maximum over Nominal Frequency of 166.000001MHz to
200MHz
Output Voltage Logic High (V
)
OH
I
= -8mA
OH
90% of V
Minimum
Maximum
DD
Output Voltage Logic Low (V
Duty Cycle
)
I
= +8mA
OL
OL
10% of V
DD
Measured at 50% of Waveform
50 ±10(%)
50 ±5(%)
Rise Time/Fall Time
Load Drive Capability
Measured at 20% to 80% of Waveform
6nSec Maximum from 2.6MHz to 50MHz
4nSec Maximum from 50.000001MHz to 75MHz
2nSec Maximum from 75.000001MHz to 200MHz
30pF Maximum from 2.6MHz to 50MHz
15pF Maximum from 50.000001MHz to 200MHz
Output Logic Type
Pin 1 Connection
CMOS
Tri-State (High Impedance)
Tri-State Input Voltage (Vih and Vil)
Standby Current
90% of V
10% of V
Minimum or No Connect to Enable Output
Maximum Disable Output (High Impedance)
DD
DD
10µA Maximum (Pin 1 = Ground)
1 of 10
28-Jan-2016 1:54 PM