MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Long life, High ripple, 150℃
GQBSeries
Endurance with ripple current : 1,000 hours at 150
For automobile transmission, electric water pump and other high temperature
applications.
・
・
℃
Higher temperature
Higher ripple current
GQB
GPD
Rated voltage range : 25 & 35V, Nominal capacitance range : 560 to 3,600µF
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
RoHS2 Compliant
・
・
・
・
AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
SPECIFICATIONS
◆
Items
Characteristics
Category
-40 to +150
25, 35Vdc
℃
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
20% (M)
(at 20 , 120Hz)
℃
±
I=0.03CV or 4µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20 , 1 minute)
℃
Dissipation Factor
Rated voltage (Vdc
tan (Max.)
)
25V 35V
0.14 0.12
(tan
)
δ
δ
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
Rated voltage (Vdc 25V 35V
(at 20 , 120Hz)
℃
Low Temperature
Characteristics
(Max. Impedance Ratio)
)
Z(-25 )/Z(+20
)
)
2
4
2
4
℃
℃
℃
Z(-40 )/Z(+20
(at 120Hz)
℃
Endurance 1
Endurance 2
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated
℃
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours at 150
.
℃
Capacitance change
D.F. (tan
Leakage current
30% of the initial value
300% of the initial specified value
The initial specified value
≦±
≦
≦
)
δ
The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple
℃
current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 125
.
℃
Capacitance change
D.F. (tan
Leakage current
30% of the initial value
300% of the initial specified value
The initial specified value
≦±
≦
≦
)
δ
The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 150 without
℃
℃
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change 30% of the initial value
D.F. (tan
≦±
)
300% of the initial specified value
The initial specified value
δ
≦
≦
Leakage current
DIMENSIONS [mm]
◆
●
Terminal Code : E
Coated Case
φD 12.5
16
0.8
7.5
18
0.8
7.5
φd
F
0.6
5.0
φD'
φD 0.5
15min.
4min.
L'
Vent
Gas escape end seal
+1.5
L'
L
-1.0
PART NUMBERING SYSTEM
◆
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
1
E G Q B A A A E A A A A A M A A A H
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 560µF:561, 1,800µF:182)
Lead forming·taping code
Terminal code
Voltage code (ex. 25V:250, 35V:350)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001Y 2024