PRELIMINARY DATA SHEET
1G bits DDR2 SDRAM
EDE1116BEBG (64M words × 16 bits)
Specifications
Features
• Density: 1G bits
• Double-data-rate architecture; two data transfers per
clock cycle
• Organization
• The high-speed data transfer is realized by the 4 bits
prefetch pipelined architecture
8M words × 16 bits × 8 banks
• Package
• Bi-directional differential data strobe (DQS and /DQS)
is transmitted/received with data for capturing data at
the receiver
84-ball FBGA
Lead-free (RoHS compliant) and Halogen-free
• Power supply: VDD, VDDQ = 1.5V ± 0.075V
• Data rate: 667Mbps (max.)
• 2KB page size
• DQS is edge-aligned with data for READs; center-
aligned with data for WRITEs
• Differential clock inputs (CK and /CK)
• DLL aligns DQ and DQS transitions with CK
transitions
Row address: A0 to A12
Column address: A0 to A9
• Eight internal banks for concurrent operation
• Interface: SSTL_18
• Commands entered on each positive CK edge; data
and data mask referenced to both edges of DQS
• Data mask (DM) for write data
• Burst lengths (BL): 4, 8
• Burst type (BT):
• Posted /CAS by programmable additive latency for
better command and data bus efficiency
Sequential (4, 8)
• Off-Chip-Driver Impedance Adjustment and On-Die-
Termination for better signal quality
Interleave (4, 8)
• /CAS Latency (CL): 3, 4, 5, 6
• /DQS can be disabled for single-ended Data Strobe
operation
• Precharge: auto precharge option for each burst
access
• Driver strength: normal/weak
• Refresh: auto-refresh, self-refresh
• Refresh cycles: 8192 cycles/64ms
Average refresh period
7.8µs at 0°C ≤ TC ≤ +85°C
3.9µs at +85°C < TC ≤ +95°C
• Operating case temperature range
TC = 0°C to +95°C
Document No. E1369E10 (Ver. 1.0)
Date Published August 2008 (K) Japan
Printed in Japan
URL: http://www.elpida.com
Elpida Memory, Inc. 2008