EC4304
1A, Hysteretic, High Brightness
LED Driver with Internal Switch
GENERAL DESCRIPTION
FEATURES
The EC4304 is a high-efficiency continuous mode inductive ꢀ Operates from 7V to 40V Supply Voltage
step-down converter which drives N-channel MOSFET and ꢀ Internal 40V NDMOS Switch
it is designed for driving single or multiple series connected ꢀ Output Current 1A
LEDs from a voltage source higher than the LED voltage. It ꢀ Single Pin On/Off and Brightness Control Using
operates from input supply between 7V and 40V and
DC Voltage or PWM
provides and externally adjustable output current to 1A ꢀ EC4304 to 95% Efficiency
which is depending on supply voltage and external ꢀ Typical +/-5% LED Current Accuracy
components.
ꢀ Input Under Voltage Lockout
This EC4304 includes the output switch and high-side
output current sensing circuit, which uses an external
resistor to set the output current.
ꢀ SOT23-5L、DFN 3x3 8L、SOT89-5L Package
ꢀ RoHS Compliant and Halogen-Free
The ADJ pin will accept either a DC voltage or a PWM
waveform. This will provide either a continuous or gated
output current depending upon the control frequency. The
PWM filter components contains a soft-start rising time
setting. The soft-start time can be increased by using an
external capacitor from the ADJ pin to ground. Applying a
0.2V or lower to the ADJ pin turns the output off and
switches the device into a low current standby state.
Applications
ꢀ Automotive LED Lighting
ꢀ High Power LED Lighting
ꢀ Indicator and Emergency Lighting
ꢀ Architectural Lighting
ꢀ Low Voltage Industrial Lighting
ꢀ Signage and Decorative LED Lighting
Functional Block Diagram
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 13
4B25N-Rev.F005