EB52E9 Series
EB52E9
•
•
•
RoHS Compliant (Pb-free)
Temperature Compensated Crystal Oscillator (TCXO)
Stratum 3
• HCMOS Output
H 2.0
L 7.0
W 5.0
•
•
•
3.3V Supply Voltage
Ceramic 10-Pad SMD Package
External Voltage Control Option Available
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Nominal Frequency (MHz)
Frequency Stability
6.144, 6.400, 6.500, 8.000, 9.720, 10.000, 12.288, 12.800, 13.000, 16.000, 19.440, 20.000
vs. Operating Temperature Range (VDD = 3.3VDC, VC = 1.65VDC)
Inclusive of Frequency Stability and 24 Hours Aging
0.28ppm Maximum
0.37ppm Maximum
4.6ppm Maximum
Total Holdover Stability
Total Frequency Tolerance
Inclusive of Frequency Tolerance, Frequency Stability, VDD ( 1ꢀ), Load
( 5ꢀ), Solder Reflow, and 20 Years Aging
See Part Numbering Guide
3.3VDC 5ꢀ
Operating Temperature Range
Supply Voltage (VDD
Input Current
)
10mA Maximum
90ꢀ of VDD Minimum
10ꢀ of VDD Maximum
5nSec Maximum
50 5(ꢀ) Maximum
15pF HCMOS Load
5ppm Minimum
0.0VDC to VDD
IOH = -4mA
Output Voltage Logic High (VOH
)
IOL = +4mA
Output Voltage Logic Low (VOL)
Rise/Fall Time
Measured at 20ꢀ to 80ꢀ of Waveform
Measured at 50ꢀ of Waveform
Duty Cycle
Load Drive Capability
External Trim (Control Voltage Option)
Control Voltage Range
Linearity
1.65VDC 1.65VDC; Positive Transfer Characteristic
5ꢀ Maximum
100kOhms Minimum
-80dBc/Hz
Input Impedance
At offset of 10Hz
At offset of 100Hz
At offset of 1kHz
At offset of >10kHz
No Connect
Typical Phase Noise (at
12.800MHz)
-115dBc/Hz
-135dBc/Hz
-145dBc/Hz
Enables Output
Enables Output
Disables Output: High Impedance
1pSec Maximum
5mSec Maximum
-40°C to 125°C
Tri-State Input Voltage (VIH and VIL)
+0.9VDD Minimum
+0.1VDD Maximum
FJ = 12kHz to 20MHz
RMS Phase Jitter
Start Up Time
Storage Temperature Range
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EB52E9
CERAMIC
3.3V
OS5Q
04/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.