PF1004-01
E0C62M2
4-bit Single Chip Microcomputer
● Core CPU Architecture
● Dual Slope Type A/D Converter
● High Quality Display LCD Driver
● SVD Circuit
■ DESCRIPTION
The E0C62M2 is a CMOS 4-bit single-chip microcomputer made up of the 4-bit core CPU E0C6200A, ROM,
RAM, dual slope type A/D converter, attenuator circuit for various measurement modes, LCD driver, serial
interface, and other circuits. It is especially suitable for measurement and LCD display systems such as a digital
multimeter.
■ FEATURES
● CMOS LSI 4-bit parallel processing
● Clock .....................................................32.768kHz (Typ.)
● Instruction set........................................100 instructions
● Instruction execution time .....................153µsec, 214µsec, 366µsec
● ROM capacity .......................................1,536 words × 12 bits
● RAM capacity ........................................128 words × 4 bits
● A/D converter ........................................Dual slope type
Resolution : Conversion time (2 stages)
4,370 counts : 400 msec
A/D conversion precision: ±0.1%
(operating temperature range: 20°C to 40°C)
441 counts : 100 msec (High speed mode)
3 integral resistors can be connected
Current, voltage and resistance can be measured
AC voltage/AC current can be measured using an external rectifier circuit
Continuity check mode built-in (measurement value can be displayed)
Reference voltage generation circuit built-in
● Input port ...............................................8 bits (pull down resistors can be supplemented by mask option)
● Output port ............................................4 bits
● Buzzer output ........................................2 ports (BZ, BZ)
● I/O port ..................................................4 bits
● Serial interface ......................................1 port for data input
These ports can be switched
to general I/O port
1 port for data output
1 port for clock input/output
● LCD driver .............................................16 segments × 3 or 4 commons (can be switched using software)
LCD drive voltage generation circuit built-in (VL1, VL2, VL3)
Compatible with 3V LCD panel
● Timer .....................................................Built-in
● Watchdog timer .....................................Built-in
●
Supply voltage detection (SVD) circuit .. 2.3 ± 0.15V
● Interrupt.................................................External : Input port interrupt
2 systems
1 system
1 system
Internal : A/D interrupt
Timer interrupt
Serial interface interrupt 1 system
● Supply voltage ......................................3.0V (2.15V to 3.5V)
● Current consumption (Typ.) ..................HALT mode (32.768kHz/3.0V) : 3µA (Typ.)
A/D operating (32.768kHz/3.0V) : 0.9mA (in DC measurement)
A/D operating (32.768kHz/3.0V) : 1.1mA (in AC measurement)
● Package ................................................QFP5-80pin (plastic/ceramic), QFP14-80pin (plastic) or chip
SEIKO EPSON CORPORATION
1