DTIPU80 Series
80 Watts
Single Output
Rev B
AC/DC Desktop Power Supply
FEATURES
● 100% Burn-in
● Class I Insulation
● IEC-320-C14 Input Inlet
● Active Power Factor Correction
● Optional Output Connectors Available
● Output Voltage Protection (Crowbar Design)
● CEC Level V and Energy Star 2.0 Compliant
● -20°C ~ 70°C Operating Temperature Range
● Wide Input Voltage Range: 90 to 260VAC, 47~63Hz
● Input Surge Current, Over Voltage, and Over Load Protection
DESCRIPTION
The DTIPU80 series of AC/DC desktop switching mode power supplies provides 80 watts of continuous output power. This series consists
of single output supplies with a universal input range of 90~260VAC and an IEC-320-C14 AC input connector. Some features include
active power factor correction, -20°C~+70°C operating temperature range, and input surge current, over voltage, and over load protection.
All supplies are CEC Level V, Energy Star 2.0, and UL 94V-1 compliant. This series meets FCC-Part-15 class B and CISPR-22 class B
emission limits and are designed to comply with UL/c-UL (UL 60950-1), TUV/GS (EN 60950-1), and new CE requirements. All models are
100% burn-in tested.
SPECIFICATIONS: DTIPU80 Series
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT (Vin)
TEST CONDITIONS
Min
Nom
Max
Unit
Operating Voltage Range
Input Frequency
90
47
260
63
1.07
0.5
45
92
0.75
2
VAC
Hz
A
A
A
A
mA
s
Input Current (Low Line)
Input Current (High Line)
Inrush Current (Low Line)
Inrush Current (High Line)
Safety Ground Leakage Current
Start-Up Time
Io = Full Load, Vin = 115VAC
Io = Full Load, Vin = 230VAC
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
Io = Full Load, Vin = 240VAC
42
88
0.5
1
Io = Full Load, Vin = 100VAC
0.3
OUTPUT (Vo)
Output Voltage Range
Load Regulation
Line Regulation
See Rating Chart
Vin = 230VAC
Io = Full Load
Vin = 90 to 260VAC
3
0.5
7
1
%
%
W
Output Power
0
80
Output Current Range
Ripple & Noise (peak to peak)
Transient Response Time
Hold-Up Time
See Rating Chart
Full Load, Vin = 90VAC
Io = Full Load to Half Load, Vin = 100VAC
Io = Full Load, Vin = 100VAC
0.5
1
%
ms
ms
4
16
PROTECTION
Over Voltage Protection
Over Current Protection
GENERAL
112
110
132
150
%
%
Efficiency
Io = Full Load, Vin = 230VAC
Primary to Secondary
87
%
Dielectric Withstanding Voltage
For Primary to Secondary
Dielectric Withstanding Voltage
For Primary to Ground
Isolation Resistance
Power Factor Correction
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Relative Humidity
4242
VDC
Primary to Ground
2121
VDC
MΩ
Test Voltage = 500VDC
Io = Full Load, Vin = 90~260VAC
50
0.95
0.97
1
Derates linearly from 100% Load at 40°C to 50% load at 70°C
-20
-40
5
+70
+85
95
°C
°C
%
Temperature Coefficient
MTBF
All Outputs
-0.04
+0.04
100,000 hours
%/°C
Operating Temperature at 25°C, Calculated per MIL-HDBK-217F
PHYSICAL
Weight
Approximately 600 ~ 700 grams
5.75 x 2.99 x 1.69 inches
146.0 x 76.0 x 43.0 mm
Dimensions (L x W x H)
SAFETY
EMI Requirements for CISPR-22
EMI Requirements for FCC PART-15
Vin = 220VAC
Vin = 110VAC
B
B
Class
Class
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
9/19/2019
Page 1 of 3