DTIPU63 Series
Single Output
Up to 63 Watts
Rev C
AC/DC Desktop Power Supply
FEATURES
● Class I
● Over Voltage and Over Load Protection
● CEC Level V and Energy Star Compliant
● Approved as Limited Power Source (LPS)
● Over Voltage Protection (Crowbar Design)
● -20°C~+70°C Operating Temperature Range
● Wide Input Voltage Range: 90 to 264VAC, 47~63Hz
● Splash Proof
● 100% Burn-in
● RoHS Compliant
● IEC-320-C14 Input Inlet
● Altitude: 0 - 10,000 Feet
● Optional Output Connectors Available
DESCRIPTION
The DTIPU63 series of AC/DC desktop switching power supplies provides up to 63 watts of continuous output power. All models have a
single output, a 90~264VAC input voltage range, and an IEC-320-C14 input connector for worldwide applications. These supplies have a
-20°C~+70°C operating temperature range and are protected against over voltage and over load conditions. All models meet FCC-Part-15
class B and CISPR-22 class B emission limits and have UL/c-UL (UL 60950-1) and TUV/GS (EN 60950-1) approvals. These supplies are
UL 94V-1, RoHS, CEC Level V, and Energy Star compliant. This series also meets new CE requirements and are 100% burn-in tested.
SPECIFICATIONS: DTIPU63 Series
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT (Vin)
TEST CONDITIONS
Min
Nom
Max
Unit
Operating Voltage Range
Input Frequency
90
47
264
63
1.6
0.7
15
30
0.75
2
VAC
Hz
A
A
A
A
mA
s
Input Current (Low Line)
Input Current (High Line)
Inrush Current (Low Line)
Inrush Current (High Line)
Safety Ground Leakage Current
Start-Up Time
OUTPUT (Vo)
Output Voltage
Load Regulation
Line Regulation
Io = Full Load, Vin = 115VAC
Io = Full Load, Vin = 230VAC
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
Io = Full Load, Vin = 240VAC
12
26
0.5
1
Io = Full Load, Vin = 100VAC
0.3
0
See Table
Vin = 230VAC
Io = Full Load
Vin = 90 to 264VAC
3
0.5
5
1
63
%
%
W
Output Power
Output Current
See Table
Ripple & Noise (peak to peak)
Transient Response Time
Hold-Up Time
Full Load, Vin = 90VAC
0.5
1
4
%
ms
ms
Io = Full Load to Half Load, Vin = 100VAC
Io = Full Load, Vin = 100VAC
All Outputs
16
-0.04
Temperature Coefficient
+0.04
%/°C
PROTECTION
Over Voltage Protection
Over Current Protection
GENERAL
112
110
132
150
%
%
Efficiency
Io = Full Load, Vin = 230VAC
Primary to Secondary
Primary to Ground
Test Voltage = 500VDC
No load, Vin=240VAC
84
4242
2121
50
88
91
%
VDC
VDC
MΩ
W
Dielectric Withstanding Voltage
Dielectric Withstanding Voltage
Isolation Resistance
No Load Power Consumption
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Relative Humidity
0.1
0.5
Derates linearly from 100% Load at 40°C to 50% load at 70°C
-20
-40
5
+70
+85
95
°C
°C
%
MTBF
Operating Temperature at 25°C, Calculated per MIL-HDBK-217F
130,000 hours
PHYSICAL
Weight
Approximately 12oz (340g)
4.65 x 2.05 x 1.36 inches
118.0 x 52.0 x 34.5 mm
Dimensions (L x W x H)
SAFETY
EMI Requirements for CISPR-22
EMI Requirements for FCC PART-15
Vin = 220VAC
Vin = 110VAC
B
B
Class
Class
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
9/20/2019
Page 1 of 3