DSP56311EVMIG/D
Rev. 1.1, 12/1999
Freescale Semiconductor, Inc.
DSP56311EVM PRODUCT INSTALLATION GUIDE
DSP56311EVM Sample Code
6
Welcome and thank you for choosing this Motorola
DSP Development Tools product. This document
provides instructions on how to set up the DSP56311
Evaluation Module (EVM) product.
The DSP56311EVM kit includes sample software that demonstrates various features of the DSP56311 processor
and the DSP56311EVM board. You will need an audio input source and headphones or amplified speakers to run
some of the sample code. The sample code is located at installed directory\dsp56311evm\sample_code.
The following demonstration source codes are included:
If you have any questions, please contact the DSP
Technical Support organization via e-mail at:
60Hz Demonstration (60hzdemo.asm):
This sample code illustrates many features of the DSP56311EVM product.An external audio signal is first applied into an input of the EVM
board. A 60Hz signal is generated by the DSP. Both the external signal and the 60Hz signal are added producing a digital audio signal with an
apparent 60Hz hum. The resultant signal is then sent to a digital 60Hz notch filter which removes the 60Hz hum.
dsphelp@dsp.sps.mot.com
Audio Pass Through Demonstration (pass.asm):
This sample code passes digital audio signals directly though the DSP without any modifications.
or on the World Wide Web at:
Echo Demonstration (echo.asm):
This sample code allows a user to input an audio signal into the EVM. The audio signal passes through the on-board codec and the digital signal
is then processed through the DSP. During the processing of the signal, a delay is added to the signal to achieve a simple echo.
http://www.motorola.com/SPS/DSP/support
To obtain any DSP Software Tools documentation,
please go to the DSP Tools web site on the World
Wide Web at:
Flash Memory Demonstration (flash.asm):
This sample code illustrates the use of the on board flash memory. The memory can be used to store
user-bootable code.
Filter Test Demonstration (fltr_tst.asm):
This sample code demonstrates the use of the on-board external memory, analog circuitry, and OnCE
port circuitry of the DSP56311EVM.
www.motorola.com/SPS/DSP/tools/documentation
Please refer to the actual source code files for more information about the sample code.
Kit Contents
1
For information regarding the DSP
Tools please access our site on the
World Wide Web at:
Your DSP56311EVM product includes the following
components:
Hardware
http://www.motorola.com/SPS/DSP/tools
- DSP56311EVM board
- Parallel port extender cable
- Plastic standoffs and plastic screws
This document contains information on a
new product. Motorola reserves the right to
make changes without further notice to any
of its products herein.
DSP56311EVM Development Tools CD-ROM
- DSP56300 Tools Software
- Device and tools documentation
- Tutorial/example software
Motorola and
are registered trademarks
Printed Documentation
of Motorola, Inc. All other tradenames,
trademarks, and registered trademarks are
the property of their respective owners.
- DSP56311EVM Development Tools Release Notes
- DSP56311EVM Product Installation Guide
(this document)
© Copyright Motorola, Inc., 1999. All rights reserved.
For More Information On This Product,
Go to: www.freescale.com
1PHX36644-0 Printed in USA 4/01 Prisma Graphic #4802 300 LITDEVSY