®
DSP201
DSP202
DSP-Compatible Single/Dual
DIGITAL-TO-ANALOG CONVERTERS
FEATURES
DESCRIPTION
● ZERO-CHIP INTERFACE TO DSP ICs:
The DSP201 and DSP202 are high performance digi-
tal-to-analog converters designed for simplicity of use
with modern digital signal processing ICs. Both are
complete with all interface logic for use directly with
DSP ICs, and provide analog output voltages updated
at up to 500kHz.
AD, AT&T, MOTOROLA, TI
● SINGLE CHANNEL: DSP201
● DUAL CHANNEL: DSP202
Two Serial Inputs or Cascade from Single
32-Bit Word
The DSP201 offers a single complete voltage output
channel, accepting either 16 bits or 18 bits of input
data, and can be driven by 16-bit, 24-bit, or 32-bit
serial ports. The DSP202 offers two complete voltage
output channels, with either two separate input ports,
or a mode to drive both output channels from a single
32-bit word.
● UPDATE RATE TO 500kHz
● DYNAMIC SPECIFICATIONS:
Signal/(Noise + Distortion) = 90dB;
THD = –92dB
● USER SELECTABLE 16-BIT OR 18-BIT
DATA WORDS
Both the DSP201 and DSP202 are packaged in stan-
dard, low-cost 28-pin plastic DIP packages. Each is
offered in two performance grades to match applica-
tion requirements.
Convert Command
Latch Enable
Analog Voltage
18-Bit DAC
Reset
Output
Control
Channel A
Logic
Select Sync Format
Select Word Length (16/18)
Channel A Data In
Sync
Reference
Analog Voltage
Bit Clock
Output
Channel B
18-Bit DAC
Channel B Data In
Cascade
Channel B on DSP202 Only
International Airport Industrial Park
•
Mailing Address: PO Box 11400
Cable: BBRCORP
•
Tucson, AZ 85734
•
Street Address: 6730 S. Tucson Blvd.
• Tucson, AZ 85706
Tel: (520) 746-1111 Twx: 910-952-1111
•
•
•
Telex: 066-6491
•
FAX: (520) 889-1510
•
Immediate Product Info: (800) 548-6132
©1991 Burr-Brown Corporation
PDS-1067C
Printed in U.S.A. July, 1993