DS90CP22
www.ti.com
SNLS053E –MARCH 2000–REVISED APRIL 2013
DS90CP22 800 Mbps 2x2 LVDS Crosspoint Switch
Check for Samples: DS90CP22
1
FEATURES
DESCRIPTION
DS90CP22 is a 2x2 crosspoint switch utilizing LVDS
(Low Voltage Differential Signaling) technology for
low power, high speed operation. Data paths are fully
differential from input to output for low noise
generation and low pulse width distortion. The non-
blocking design allows connection of any input to any
output or outputs. LVDS I/O enable high speed data
transmission for point-to-point interconnects. This
device can be used as a high speed differential
crosspoint, 2:1 mux, 1:2 demux, repeater or 1:2
signal splitter. The mux and demux functions are
useful for switching between primary and backup
circuits in fault tolerant systems. The 1:2 signal
splitter and 2:1 mux functions are useful for
distribution of serial bus across several rack-mounted
backplanes.
2
•
•
DC - 800 Mbps Low Jitter, Low Skew Operation
65 ps (typ) of Pk-Pk Jitter with PRBS = 223−1
Data Pattern at 800 Mbps
•
•
Single +3.3 V Supply
Less than 330 mW (typ) Total Power
Dissipation
•
•
•
•
Non-Blocking "'Switch Architecture"'
Balanced Output Impedance
Output Channel-to-Channel Skew is 35 ps (typ)
Configurable as 2:1 mux, 1:2 demux, Repeater
or 1:2 Signal Splitter
•
•
•
•
•
LVDS Receiver Inputs Accept LVPECL Signals
Fast Switch Time of 1.2ns (typ)
The DS90CP22 accepts LVDS signal levels, LVPECL
levels directly or PECL with attenuation networks.
Fast Propagation Delay of 1.3ns (typ)
Receiver Input Threshold < ±100 mV
The individual LVDS outputs can be put into TRI-
STATE by use of the enable pins.
Available in 16 Lead TSSOP and SOIC
Packages
•
•
Conforms to ANSI/TIA/EIA-644-1995 LVDS
Standard
For more details, please refer to the Application
Information section of this datasheet.
Operating Temperature: −40°C to +85°C
Connection Diagram
Figure 1. SOIC-16 Package
or
TSSOP-16 Package
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2013, Texas Instruments Incorporated