5秒后页面跳转
DS64BR401 PDF预览

DS64BR401

更新时间: 2023-09-03 20:32:45
品牌 Logo 应用领域
德州仪器 - TI 驱动驱动器
页数 文件大小 规格书
37页 4352K
描述
具有均衡和去加重功能的 6.4Gbps 四路双向转接驱动器

DS64BR401 技术参数

是否Rohs认证: 符合生命周期:Transferred
包装说明:HVQCCN, LCC54,.2X.4,20Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:5.31差分输出:YES
驱动器位数:4输入特性:DIFFERENTIAL
接口集成电路类型:LINE TRANSCEIVER接口标准:GENERAL PURPOSE
JESD-30 代码:R-XQCC-N54JESD-609代码:e3
长度:10 mm湿度敏感等级:2
功能数量:4端子数量:54
最高工作温度:85 °C最低工作温度:-10 °C
封装主体材料:UNSPECIFIED封装代码:HVQCCN
封装等效代码:LCC54,.2X.4,20封装形状:RECTANGULAR
封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度(摄氏度):260
电源:2.5 V认证状态:Not Qualified
最大接收延迟:0.25 ns接收器位数:4
座面最大高度:0.8 mm子类别:Line Driver or Receivers
最大供电电压:2.625 V最小供电电压:2.375 V
标称供电电压:2.5 V表面贴装:YES
温度等级:OTHER端子面层:Matte Tin (Sn)
端子形式:NO LEAD端子节距:0.5 mm
端子位置:QUAD处于峰值回流温度下的最长时间:40
最大传输延迟:0.25 ns宽度:5.5 mm
Base Number Matches:1

DS64BR401 数据手册

 浏览型号DS64BR401的Datasheet PDF文件第2页浏览型号DS64BR401的Datasheet PDF文件第3页浏览型号DS64BR401的Datasheet PDF文件第4页浏览型号DS64BR401的Datasheet PDF文件第5页浏览型号DS64BR401的Datasheet PDF文件第6页浏览型号DS64BR401的Datasheet PDF文件第7页 
DS64BR401  
www.ti.com  
SNLS304G JUNE 2009REVISED APRIL 2013  
DS64BR401 Quad Bi-Directional Repeater with Equalization and  
De-Emphasis  
Check for Samples: DS64BR401  
1
FEATURES  
DESCRIPTION  
The DS64BR401 is a quad lane bi-directional signal  
conditioning repeater for 6.0/3.0/1.5 Gbps SATA/SAS  
and other high-speed bus applications with data rates  
up to 6.4 Gbps. The device performs both receive  
equalization and transmit de-emphasis on each of its  
8 channels to compensate for channel loss, allowing  
maximum flexibility of physical placement within a  
system. The receiver's continuous time linear  
equalizer (CTLE) provides a boost of up to +33 dB at  
3 GHz and is capable of opening an input eye that is  
completely closed due to inter-symbol interference  
(ISI) induced by the interconnect medium. The  
2
Quad lane bi-directional repeater up to 6.4  
Gbps rate  
Signal conditioning on input and output for  
extended reach  
Adjustable receive equalization up to +33 dB  
gain  
Adjustable transmit de-emphasis up to 12 dB  
Adjustable transmit VOD (600 mVp-p to 1200  
mVp-p)  
<0.25 UI of residual DJ at 6.4 Gbps with 40”  
FR4 trace  
transmitter features  
a programmable output de-  
emphasis driver and allows amplitude voltage levels  
to be selected from 600 mVp-p to 1200 mVp-p to suit  
multiple application scenarios. This Low Power  
Differential Signaling (LPDS) output driver is a power  
efficient implementation that maintains compatibility  
with AC coupled CML receiver. The programmable  
settings can be applied via pin settings or SMBus  
interface.  
Automatic de-emphasis scaling based on rate  
detect  
SATA/SAS: OOB signal pass-through,  
<3 ns (typ) envelope distortion  
Adjustable electrical IDLE detect threshold  
Low power (100 mW/channel), per-channel  
power down  
To enable seamless upgrade from SAS/SATA 3.0  
Gbps to 6.0 Gbps data rates without compromising  
physical reach, DS64BR401 automatically detects the  
incoming data rate and selects the optimal de-  
emphasis pulse width. The device detects the out-of-  
band (OOB) idle and active signals of the SAS/SATA  
specification and passes through with minimum signal  
distortion.  
Programmable via pin selection or SMBus  
interface  
Single supply operation at 2.5V ±5%  
>6 kV HBM ESD Rating  
3.3V LVCMOS input tolerant for SMBus  
interface  
High speed signal flow–thru pinout package:  
54-pin WQFN (10 mm x 5.5 mm)  
With a typical power consumption of 200 mW/lane  
(100 mW/channel) at 6.4 Gbps, and control to turn-off  
unused channels, the DS64BR401 is part of Texas  
Instruments' PowerWise family of energy efficient  
devices.  
APPLICATIONS  
SATA (1.5, 3.0 and 6 Gbps)  
SAS (1.5, 3.0 and 6 Gbps)  
XAUI (3.125 Gbps), RXAUI (6.25 Gbps)  
sRIO – Serial Rapid I/O  
Fibre Channel (4.25 Gbps)  
10GBase-CX4, InfiniBand 4x (SDR & DDR)  
QSFP active copper cable modules  
High-speed active cable and FR-4 backplane  
traces  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
All trademarks are the property of their respective owners.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2009–2013, Texas Instruments Incorporated  

与DS64BR401相关器件

型号 品牌 获取价格 描述 数据表
DS64BR401SQ NSC

获取价格

Quad Bi-Directional Transceiver with Equalization and De-Emphasis
DS64BR401SQ/NOPB NSC

获取价格

IC QUAD LINE TRANSCEIVER, QCC54, 5.50 X 10 MM, 0.80 MM HEIGHT, 0.50 MM PITCH, LLP-54, Line
DS64BR401SQ/NOPB TI

获取价格

具有均衡和去加重功能的 6.4Gbps 四路双向转接驱动器 | NJY | 54 | -1
DS64BR401SQE NSC

获取价格

Quad Bi-Directional Transceiver with Equalization and De-Emphasis
DS64BR401SQE/NOPB TI

获取价格

具有均衡和去加重功能的 6.4Gbps 四路双向转接驱动器 | NJY | 54 | -1
DS64EV100 NSC

获取价格

Programmable Single Equalizer
DS64EV100_08 NSC

获取价格

Programmable Single Equalizer
DS64EV100SD NSC

获取价格

Programmable Single Equalizer
DS64EV100SDX NSC

获取价格

Programmable Single Equalizer
DS64EV400 NSC

获取价格

Programmable Quad Equalizer