是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | 零件包装代码: | SOT-23 |
包装说明: | LSSOP, TSOP6,.11,37 | 针数: | 6 |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | Factory Lead Time: | 6 weeks |
风险等级: | 0.69 | Is Samacsys: | N |
模拟集成电路 - 其他类型: | ANALOG CIRCUIT | JESD-30 代码: | R-PDSO-G6 |
长度: | 2.9 mm | 湿度敏感等级: | 1 |
功能数量: | 1 | 端子数量: | 6 |
最高工作温度: | 85 °C | 最低工作温度: | -40 °C |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | LSSOP |
封装等效代码: | TSOP6,.11,37 | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH | 峰值回流温度(摄氏度): | NOT SPECIFIED |
电源: | 3/75 V | 认证状态: | Not Qualified |
座面最大高度: | 1.45 mm | 子类别: | Other Analog ICs |
最大供电电流 (Isup): | 4.4 mA | 最大供电电压 (Vsup): | 76 V |
最小供电电压 (Vsup): | 2.97 V | 标称供电电压 (Vsup): | 3 V |
表面贴装: | YES | 温度等级: | INDUSTRIAL |
端子形式: | GULL WING | 端子节距: | 0.95 mm |
端子位置: | DUAL | 处于峰值回流温度下的最长时间: | NOT SPECIFIED |
宽度: | 1.625 mm | Base Number Matches: | 1 |
型号 | 品牌 | 替代类型 | 描述 | 数据表 |
DS3920T-001+T | MAXIM |
类似代替 |
Fast Current Mirror Voltage Clamp Protects Subsequent Output Circuitry | |
DS3920T-001+ | MAXIM |
类似代替 |
Fast Current Mirror Voltage Clamp Protects Subsequent Output Circuitry |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
DS3920T-002+T | MAXIM |
获取价格 |
Fast Current Mirror Voltage Clamp Protects Subsequent Output Circuitry | |
DS3921 | TTELEC |
获取价格 |
Platon Plastic Tube VA Flow Meter Spares | |
DS3922 | ADI |
获取价格 |
High-Speed Current Mirror and Integrated FETs for DC-DC Controller | |
DS3930 | MAXIM |
获取价格 |
RELIABILITY REPORT FOR DS3930, REV A1 | |
DS3930 | DALLAS |
获取价格 |
Hex Nonvolatile Potentiometer with I/O and Memory | |
DS3930 | ADI |
获取价格 |
六进制非易失电位器,带有输入/输出和存储器 | |
DS3930E | DALLAS |
获取价格 |
Hex Nonvolatile Potentiometer with I/O and Memory | |
DS3930E+ | MAXIM |
获取价格 |
Digital Potentiometer, 2 Func, 16500ohm, 2-wire Serial Control Interface, 256 Positions, P | |
DS3930E+T&R | MAXIM |
获取价格 |
Digital Potentiometer, 2 Func, 16500ohm, 2-wire Serial Control Interface, 256 Positions, P | |
DS3984 | DALLAS |
获取价格 |
4-Channel Cold-Cathode Fluorescent Lamp Controller |