Datasheet > 驱动程序和接口 > 线路驱动器或接收器> DS3892N

DS3892N

更新时间： 2024-11-08 23:14:43

品牌	Logo	应用领域
美国国家半导体 - NSC		驱动器接口集成电路光电二极管接收机
页数	文件大小	规格书
8页	142K
描述
Octal Trapezoidal Driver / Octal TRI-STATE Receiver

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

DS3892N 数据手册

January 1996

DS3890 BTL Octal Trapezoidal Driver

DS3892 BTL Octal TRI-STATE Receiver

General Description

The DS3890 and DS3898 are designed specifically to over-

come problems associated with driving densely populated

backplanes. These products provide significant improve-

ment in both speed and data integrity in comparison to con-

ventional bus drivers and receivers. Their low output capaci-

tance, low voltage swing and noise immunity features make

them ideal for driving low impedance busses with minimum

power dissipation.

This is achieved by terminating the bus with a pull up resis-

tor. Both devices can drive an equivalent DC load of 18.5X

(or greater) in the defined configuration.

(General Description to be continued)

Features

Driver output capacitance less than 5 pF

1 volt bus signal reduces power consumption

The DS3890 features an open collector outputs that gener-

ate precise trapezoidal waveforms with typical rise and fall

times of 6 ns which are relatively independent of capacitive

loading conditions. These controlled output characteristics

significantly reduce noise coupling to adjacent lines.

Trapezoidal driver waveforms (t , t , typically 6 ns) re-

duces noise coupling to adjacent lines

Precise receiver threshold track the bus logic high level

to maximize noise immunity in both logic high ahd low

states

To minimize bus loading, the DS3890 also features

Open collector driver output allows wire-or connection

Advanced low power schottky technology

Glitch free power up/down protection

TTL compatible driver and control inputs and receiver

output

schottky diode in series with the open collector outputs that

isolates the driver output capacitance in the disabled state.

With this type of configuration the output low voltage is typi-

cally ‘‘1V’’. The output high level is intended to be 2 volts.

BTL compatible

Logic and Connection Diagrams

DS3890 Octal Trapezoidal Driver

DS3892 Octal TRI-STATE Receiver

TL/F/8700–1

TL/F/8700–2

Order Numbers DS3892M, DS3890N or DS3892N

See NS Package Number M20B or N20A

TRI-STATEÉ is a registered trademark of National Semiconductor Corporation.

1996 National Semiconductor Corporation

TL/F/8700

RRD-B30M36/Printed in U. S. A.

http://www.national.com

12 3 4 5 6 7 8

中文翻译

下载PDF

与DS3892N相关器件

型号	品牌	获取价格	描述	数据表
DS3892N/A+	ETC	获取价格	Line Receiver
DS3892N/B+	ETC	获取价格	Line Receiver
DS3893A	NSC	获取价格	BTL TURBOTRANSCEIVER⑩
DS3893A_09	NSC	获取价格	BTL TURBOTRANSCEIVER™
DS3893AV	NSC	获取价格	BTL TURBOTRANSCEIVER⑩
DS3893AV/NOPB	TI	获取价格	LINE TRANSCEIVER, PQCC20
DS3893AVX	ETC	获取价格	4-Bit Bus Transceiver
DS3893V	ETC	获取价格	4-Bit Bus Transceiver
DS3894	ZARLINK	获取价格	PRECISION SERVO INTEGRATED CIRCUIT
DS3896	NSC	获取价格	BTL Trapezoidal⑩ Transceivers