19-6131; Rev 11/11
DS2411
Silicon Serial Number with VCC Input
FEATURES
PIN CONFIGURATION
. Unique, Factory-Lasered and Tested 64-Bit
Registration Number (8-Bit Family Code
Plus 48-Bit Serial Number Plus 8-Bit CRC
Tester); Guaranteed No Two Parts Alike
. Standby Current <1μA
. Built-In Multidrop Controller Enables
Multiple DS2411s to Reside on a Common
1-Wire Network
. Multidrop Compatible with Other 1-Wire
Products
. 8-Bit Family Code Identifies Device as
DS2411 to the 1-Wire Master
3
1
2
3
6
5
4
1
2
SOT23-3, Top View
TSOC, Top View
Flip Chip, Top View with
Laser Mark, Contacts
Not Visible.
1
-1rrd
2
“rrd” = Revision/Date
A
B
. Low-Cost TSOC, SOT23-3, and Flip-Chip
Surface-Mount Packages
. Directly Connects to a Single-Port Pin of a
Microprocessor and Communicates at up to
15.4kbps
. Overdrive Mode Boosts Communication
Speed to 125kbps
. Operating Range: 1.5V to 5.25V, -40°C to
+85°C
ORDERING INFORMATION
TEMP
RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-
PART
PACKAGE
3 SOT23-3
6 TSOC
DS2411R+T&R
DS2411P+
6 TSOC
4 Flip Chip*
DS2411P+T&R
DS2411X
+Denotes a lead(Pb)-free/RoHS-compliant package.
T&R = Tape and reel.
*The DS2411X is RoHS qualified and comes in tape and reel.
PIN DESCRIPTION
PIN
NAME
FLIP
CHIP
A1
B2
B1
SOT23 TSOC
I/O
VCC
GND
N.C.
1
2
3
2
6
1
—
3, 4, 5
A2
DESCRIPTION
The DS2411 silicon serial number is a low-cost, electronic registration number with external power
supply. It provides an absolutely unique identity that can be determined with a minimal electronic
interface (typically, a single port pin of a microcontroller). The DS2411’s registration number is a
factory-lasered, 64-bit ROM that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit
family code (01h). Data is transferred serially through the Maxim 1-Wire protocol. The external power
supply is required, extending the operating voltage range of the device below typical 1-Wire devices.
1-Wire is a registered trademark of Maxim Integrated Products, Inc.
1 of 12