DS2119M
Ultra3 LVD/SE SCSI Terminator
www.maxim-ic.com
PIN CONFIGURATION
FEATURES
ꢀ Fully Compliant with SCSI SPI-2, SPI-3,
SPI-4, Ultra160, and Ultra320
1
2
3
4
5
6
7
8
9
28
27
26
25
24
23
22
21
20
19
18
17
16
15
TPWR
TPWR
R9N
VREF
RIP
ꢀ Provides Multimode Low-Voltage
Differential/Single-Ended (LVD/SE)
Termination for Nine Signal Line Pairs
DS2119M
RIN
R2P
R9P
R2N
R8N
HS GND
R3P
R8P
ꢀ Autoselection of LVD or SE Termination
HS GND
R7N
ꢀ 5% Tolerance on SE and LVD Termination
R3N
Resistance
R4P
R7P
R4N
10
11
12
13
14
R6N
ꢀ Low Power-Down Capacitance of 3pF
ꢀ On-Board Thermal Shutdown Circuitry
ꢀ SCSI Bus Hot Plug Compatible
R5P
R6P
DIFF_CAP
DIFFSENSE
MSTR/SLV
R5N
ISO
GND
ꢀ Fully Supports Actively Negated SE SCSI
TSSOP
Signals
ORDERING INFORMATION
VOLTAGE
PART
TEMP RANGE PIN-PACKAGE
TOP MARK*
(V)
5
DS2119ME
DS2119ME+
28 TSSOP (0.173")
28 TSSOP (0.173")
DS2119M
DS2119M
0°C to +70°C
0°C to +70°C
5
28 TSSOP (0.173")/Tape
and Reel
DS2119ME/T&R
5
DS2119M
0°C to +70°C
28 TSSOP (0.173")/Tape
and Reel
DS2119ME+T&R
5
DS2119M
0°C to +70°C
+ Denotes a lead-free/RoHS-compliant package.
* The top mark includes a "+" on lead-free packages.
DETAILED DESCRIPTION
The DS2119M Ultra3 LVD/SE SCSI terminator is both a low-voltage differential (LVD) and single-
ended (SE) terminator. The multimode operation enables the designer to implement LVD in current
products while allowing the end-user SE-backward compatibility with legacy devices. If the device is
connected in an LVD-only bus, the DS2119M will use LVD termination. If any SE devices are connected
to the bus, the DS2119M will use SE termination. This is accomplished automatically inside the part by
sensing the voltage on the SCSI bus DIFFSENS line.
For the LVD termination, the DS2119M integrates two current sources with nine precision resistor
strings. For the SE termination, one regulator and nine precision 110Ω resistors are used. Three
DS2119M terminators are needed for a wide SCSI bus.
1 of 9
REV: 010406