Datasheet > DS1075M-60-IND

DS1075M-60-IND

更新时间： 2024-09-20 03:25:19

品牌	Logo	应用领域
达拉斯 - DALLAS		光电二极管
页数	文件大小	规格书
17页	321K
描述
60MHz, OTHER CLOCK GENERATOR, PDIP8, 0.300 INCH, DIP-8

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

DS1075M-60-IND 数据手册

DS1075-IND

EconOscillator/Divider

www.dalsemi.com

FEATURES

PIN ASSIGNMENT

§ Dual Fixed frequency outputs (30 kHz - 100

MHz)

I/O

OSCIN

OUT0

V_CC

XTAL

§ User-programmable on-chip dividers (from 1

- 513)

§ User-programmable on-chip prescaler (1, 2,

§ No external components

§ ±0.5% initial tolerance

§ ±3% variation over temperature and voltage

§ Internal clock, external clock or crystal

reference options

PDN/SELX

GND

DS1075Z 150-mil SOIC

DS1075M-IND 300-mil DIP

FREQUENCY OPTIONS

Part No.

Max O/P freq.

DS1075-100 IND

DS1075-80 IND

DS1075-66 IND

DS1075-60 IND

100.000

80.000

66.667

60.000

§ Single 5V supply

§ Power-down mode

§ Synchronous output gating

DESCRIPTION

The DS1075-IND EconOscillator/Divider is a fixed frequency oscillator requiring no external

components for operation. Numerous operating frequencies are possible in the range of approximately

30kHz to 100 MHz through the use of an on-chip programmable prescaler and divider.

The DS1075-IND features a master oscillator followed by a prescaler and then a programmable divider.

The prescaler and programmable divider are user-programmable with the desired values being stored in

non-volatile memory. This allows the user to buy an off the shelf component and program it on-site prior

to board production. Design changes can be accommodated on the fly by simply programming different

values into the device (or reprogramming previously programmed devices).

The DS1075-IND is shipped from the factory configured for half the maximum operating frequency.

Contact the factory for specially programmed devices. As alternatives to the on-board oscillator an

external clock signal or a crystal may be used as a reference. The choice of reference source (internal or

external) is user-selectable at the time of programming (or on the fly if the SEL mode is chosen).

The DS1075-IND features a dual-purpose Input/Output pin. If the device is powered up in Program

mode this pin can be used to input serial data to the on chip registers. After a Write command this data is

stored in non-volatile memory. When the chip is subsequently powered up in operating mode these

values are automatically restored to the on-chip registers and the Input/ Output pin becomes the oscillator

output.

The DS1075-IND is available in 8-pin DIP or SOIC packages, allowing the generation of a clock signal

easily, economically and using minimal board area.

1 of 17

100199

12 3 4 5 6 7...17

中文翻译

下载PDF

与DS1075M-60-IND相关器件

型号	品牌	获取价格	描述	数据表
DS1075M-66	DALLAS	获取价格	EconOscillator/Divider
DS1075M-66IND	DALLAS	获取价格	Clock Generator, 66.667MHz, CMOS, PDIP8, 0.300 INCH, DIP-8
DS1075M-66N	MAXIM	获取价格	Analog Circuit, PDIP8, DIP-8
DS1075M-80	DALLAS	获取价格	EconOscillator/Divider
DS1075M-80IND	DALLAS	获取价格	Clock Generator, 80MHz, CMOS, PDIP8, 0.300 INCH, DIP-8
DS1075X-M10	MAXIM	获取价格	DS1075X-M Crystal Replacement Module
DS1075X-M60	MAXIM	获取价格	DS1075X-M Crystal Replacement Module
DS1075X-M66	MAXIM	获取价格	DS1075X-M Crystal Replacement Module
DS1075X-M80	MAXIM	获取价格	DS1075X-M Crystal Replacement Module
DS1075Z	DALLAS	获取价格	Microprocessor Circuit, CMOS, PDSO8, 0.150 INCH, SOIC-8

与DS1075M-60-IND相关文章

摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
2024-09-18

29
贸泽上架Tallysman TW5386智能GNSS天线
2024-09-18

28
SL74HC10N：高性能三输入与非门解析
2024-09-03

100
AIC1781A 电池充电控制器深度解析
2024-09-03

94

产品中心

服务支持

精选活动

关于我们

帮助中心

DS1075M-60-IND

DS1075M-60-IND 数据手册

与DS1075M-60-IND相关器件

与DS1075M-60-IND相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DS1075M-60-IND

DS1075M-60-IND 数据手册

与DS1075M-60-IND相关器件

与DS1075M-60-IND相关文章

您还可以找

您在本页遇到什么问题？