DRV9812
DRV9822
www.ti.com
SLES250 –DECEMBER 2009
Multi-Channel PWM Power Drivers for LED Applications
Check for Samples: DRV9812 DRV9822
Because of the integrated low RDS(on) MOSFETs and
intelligent gate drive design, the efficiency of the
DRV9812/22 can be as high as 96%. They have all
the protections integrated on-chip, safeguarding the
device against a wide range of fault conditions such
as short-circuit protection, overcurrent protection,
undervoltage protection, and two-stage thermal
1
FEATURES
•
Four Independent Synchronized Buck, Boost,
or Two Buck-Boost PWM Controlled Power
Stages
•
High-Efficiency Power Stage (up to 96%) with
Low RDS(on) MOSFETs (80 mΩ at TJ = 25°C)
protection.
A programmable overcurrent detector
•
•
Operating Supply Voltage up to 50 V
allows adjustable cycle-by-cycle current limit to meet
different power requirements.
DRV9812 (Pad down): up to 2.5A Continuous
Output Current
The DRV9812/22 have unique independent supply
pin for each channel, which make them possible to
support multiple outputs with different power supply
voltage requirements or mixed converter topologies.
•
DRV9822 (pad up): up to 5A Continuous
Output Current
•
•
•
PWM Operating Frequency up to 1 MHz
Integrated Self-Protection Circuits
Simplified Application Diagram
Vin
Programmable Cycle-by-Cycle Current Limit
Protection
12V
Up to 50V
•
•
•
Two-Stage Thermal Protection
DH_A
RESET_AB
DH_B
DH_C
DH_D
RESET_CD
PWM_A
PWM_B
PWM_C
PWM_D
Independent Supply Pin for Each Channel
VLED
BST_A
DL_A
Intelligent Gate Drive and Cross Conduction
Prevention
DRV9812/22
BST_B
DL_B
FAULT
OTW
BST_C
DL_C
OC_ADJ
Controller
(MSP430
C2000 or
BST_D
DL_D
APPLICATIONS
~
~
M1
M2
M3
VREG
Stellaris MCU)
~
~
•
Multi-Channel Buck, Boost, or Buck-Boost
Power Stages
~
~
~
~
•
LED Drivers
DESCRIPTION
The DRV9812/22 are wide input voltage (up to 50V)
synchronous multi-channel PWM power stages for
LED applications. They can be configured as buck,
boost, or buck-boost topology depending on
application requirements and can drive 4 independent
LED strings with up to 15 power LEDs in series per
string. They can also provide DC, sine wave, or any
other kind of desired current to drive LEDs based on
PWM control algorithm from external MCU controller.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCT PREVIEW information concerns products in the
Copyright © 2009, Texas Instruments Incorporated
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.