是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | 包装说明: | HTSSOP, |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | Factory Lead Time: | 6 weeks |
风险等级: | 1.63 | 内置保护: | OVER CURRENT; THERMAL; UNDER VOLTAGE |
驱动器位数: | 4 | 接口集成电路类型: | HALF BRIDGE BASED PERIPHERAL DRIVER |
JESD-30 代码: | R-PDSO-G28 | JESD-609代码: | e4 |
长度: | 9.7 mm | 湿度敏感等级: | 3 |
功能数量: | 1 | 端子数量: | 28 |
最高工作温度: | 85 °C | 最低工作温度: | -40 °C |
输出特性: | TOTEM-POLE | 输出电流流向: | SOURCE AND SINK |
最大输出电流: | 3 A | 输出极性: | TRUE |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | HTSSOP |
封装形状: | RECTANGULAR | 封装形式: | SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH |
峰值回流温度(摄氏度): | 260 | 座面最大高度: | 1.2 mm |
最大压摆率: | 5 mA | 最大供电电压: | 60 V |
最小供电电压: | 8 V | 标称供电电压: | 24 V |
表面贴装: | YES | 温度等级: | INDUSTRIAL |
端子面层: | Nickel/Palladium/Gold (Ni/Pd/Au) | 端子形式: | GULL WING |
端子节距: | 0.65 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 断开时间: | 0.5 µs |
接通时间: | 0.475 µs | 宽度: | 4.4 mm |
Base Number Matches: | 1 |
型号 | 品牌 | 替代类型 | 描述 | 数据表 |
DRV8844PWP | TI |
类似代替 |
QUAD 1/2-H-BRIDGE DRIVER IC |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
DRV8845 | TI |
获取价格 |
35-V, 1.5-A quad H-bridge motor driver with smart tune technology | |
DRV8845RHHR | TI |
获取价格 |
35-V, 1.5-A quad H-bridge motor driver with smart tune technology | RHH | 36 | -40 to 125 | |
DRV8846 | TI |
获取价格 |
DRV8846 Dual H-Bridge Stepper Motor Driver | |
DRV8846_15 | TI |
获取价格 |
DRV8846 Dual H-Bridge Stepper Motor Driver | |
DRV8846RGER | TI |
获取价格 |
DRV8846 Dual H-Bridge Stepper Motor Driver | |
DRV8846RGET | TI |
获取价格 |
DRV8846 Dual H-Bridge Stepper Motor Driver | |
DRV8847 | TI |
获取价格 |
具有电流调节和独立半桥控制的 18V、2A 双路 H 桥电机驱动器 | |
DRV8847PWPR | TI |
获取价格 |
具有电流调节和独立半桥控制的 18V、2A 双路 H 桥电机驱动器 | PWP | 16 | |
DRV8847PWR | TI |
获取价格 |
具有电流调节和独立半桥控制的 18V、2A 双路 H 桥电机驱动器 | PW | 16 | | |
DRV8847RTER | TI |
获取价格 |
具有电流调节和独立半桥控制的 18V、2A 双路 H 桥电机驱动器 | RTE | 16 |