DRV8841
www.ti.com
SLVSAC0D –MAY 2010–REVISED JANUARY 2012
DUAL H-BRIDGE DRIVER IC
Check for Samples: DRV8841
1
FEATURES
2
•
Dual H-Bridge DC Motor Driver
•
Thermally Enhanced Surface Mount Package
–
–
–
Drives Two DC Motors, One Stepper Motor
or Other Loads
APPLICATIONS
•
•
•
•
•
•
Printers
Two-Bit Winding Current Control Allows Up
to 4 Current Levels
Scanners
Low MOSFET On-Resistance
Office Automation Machines
Gaming Machines
Factory Automation
Robotics
•
•
•
•
2.5-A Maximum Drive Current at 24 V, 25°C
Built-In 3.3-V Reference Output
Industry-Standard PWM Control Interface
8.2-V to 45-V Operating Supply Voltage Range
DESCRIPTION
The DRV8841 provides an integrated motor driver solution for printers, scanners, and other automated
equipment applications. The device has two H-bridge drivers, and can be used to drive two DC motors, one
stepper motor, or other loads. The output driver block for each consists of N-channel power MOSFET’s
configured as H-bridges. The DRV8841 can supply up to 2.5-A peak or 1.75-A RMS output current (with proper
heatsinking at 24 V and 25°C) per H-bridge.
Separate inputs to independently control each half of the H-bridge are provided.
Internal shutdown functions are provided for over current protection, short circuit protection, under voltage
lockout and overtemperature.
TheDRV8841 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).
ORDERING INFORMATION(1)
ORDERABLE PART
NUMBER
TOP-SIDE
MARKING
TA
PACKAGE(2)
–40°C to 85°C
PowerPAD™ (HTSSOP) - PWP
Reel of 2000
DRV8841PWPR
8841
(1) For the most current packaging and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2012, Texas Instruments Incorporated