DRV2605
www.ti.com
SLOS774A –DECEMBER 2012–REVISED DECEMBER 2012
Haptic Driver for ERM and LRA with Built-In Library and Smart Loop Architecture
Check for Samples: DRV2605
1
FEATURES
DESCRIPTION
The DRV2605 is designed to give extremely flexible
haptic control of ERM and LRA actuators over a
shared I2C compatible bus. This relieves the host
processor from ever generating pulse-width
modulated (PWM) drive signals, saving both costly
timer interrupts and hardware pins.
•
Flexible Haptic/Vibra Driver
–
–
LRA (Linear Resonance Actuator)
ERM (Eccentric Rotating Mass)
•
•
I2C Controlled Digital Playback Engine
–
–
Royalty-Free Integrated Immersion Library
Real-Time Playback Mode via I2C
The DRV2605 gives royalty-free access to an
extensive integrated library (100+ effects) from
Immersion for ERM and LRA. This eliminates the
need to design haptic waveforms.
Smart Loop Architecture(1)
–
–
–
–
Automatic Overdrive/Braking (ERM/LRA)
Automatic Resonance Tracking (LRA)
Automatic Actuator Diagnostic (ERM/LRA)
Automatic Level Calibration (ERM/LRA)
Additionally, the real-time playback mode allows the
host processor to bypass the library playback engine
and play waveforms directly from the host via I2C.
The DRV2605 also contains
a
smart loop
•
•
Audio To Haptics Mode
architecture, which allows effortless auto resonant
drive for LRA as well as feedback-optimized ERM
drive. This feedback gives automatic overdrive and
braking, which creates a simplified input waveform
paradigm as well as reliable motor control and
consistent motor performance. The audio-to-haptics
mode automatically converts an audio input signal to
meaningful haptic effects.
Optional PWM Input with 0% to 100% Duty
Cycle Control Range
•
•
•
•
•
•
Optional Analog Input Control
Optional Hardware Trigger Pin
Efficient Output Drive
Fast Start Up Time
Constant Acceleration Over Supply Voltage
1.8 V Compatible, VDD Tolerant Digital Pins
Available in a 9-Ball, 0.5 mm Pitch WCSP
Patent pending control algorithm
The DRV2605 features a trinary-modulated output
stage, providing greater efficiency than linear-based
output drivers. The 9-ball WCSP footprint, flexible
operation, and low component count make the
DRV2605 the ideal choice for portable and touch-
enabled vibratory and haptic applications.
•
(1)
APPLICATIONS
•
•
•
Mobile Phones
Tablets
Touch-Enabled Devices
CVREG
2.5 V – 5.5 V
VDD
DRV2605
SDA
SCL
Feedback
Detection
OUT+
I2C
Control
I2C
I/F
ROM
REG
Playback Engine
Auto Calibration
Auto Diagnostic
EN
LRA or
Driver
DC Motor
IN/Trigger
OUT-
GND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated