DP8110 10A DC-DC Intelligent dPOL Data Sheet
8V to 14V Input • 0.7V to 5.5V Output
Features
•
•
•
Input voltage range: 8V–14V
High continuous output current: 10A
Wide digitally programmable output voltage range:
0.7V–5.5V
•
•
•
Single-wire serial communication bus between dPOL
and Digital Power Manager (DPM)
Programmable dynamic output voltage positioning for
better load transient response
Overcurrent, overvoltage, undervoltage, and
overtemperature protections with programmable
thresholds and hiccup or latching modes
•
Programmable fixed switching frequency:
500KHz or 1.0MHz
•
•
•
Programmable switching frequency phasing
Programmable turn-on and turn-off delays
Applications
Programmable turn-on and turn-off output voltage
slew rates with tracking protection
•
Low voltage, high density systems with
Intermediate Bus Architectures (IBA)
•
•
Auto Compensation
•
Point-of-load regulators for high performance DSP,
FPGA, ASIC, and microprocessor applications
In-System Loop Identification (SysID) through
pseudo-random noise injection
•
•
Desktops, servers, and portable computing
•
Power Good signal with programmable threshold and
delay.
Broadband, networking, optical, and
communications systems
•
•
•
Advance fault management and propagation
Start up into pre-biased load
Benefits
•
•
•
•
•
Integrates digital power conversion with intelligent
power management
Real time voltage, current, and temperature
measurements, monitoring, and reporting
Eliminates the need for external power
management components
Programmable via industry-standard I2C
communication bus (DPM required)
•
Industry standard size through-hole single-in-line
package: 1.2”x0.26”
•
•
Low height of 0.84”Footprint
Compatible with conventional pick-and-place
equipment
Reduce the number of discrete parts within a
power system.
•
•
Wide operating temperature range -40°C - 85°C
Reduces board space, system cost, complexity
and time to market
UL 60950-1/CSA 22.2 No. 60950-1-07 Second
Edition, IEC 60950-1: 2005, and EN 60950-1:2006
(pending)
Description
Power-One’s DP8110 is an intelligent, fully programmable step-down point-of-load DC-DC converter integrating
digital power conversion and intelligent power management. The dPOL is used in conjunction with DM73xx Series
Digital Power Manager (DPM), and completely eliminates the need for external components for output voltage
setting, sequencing, tracking, protection, monitoring, error amplifier compensation and reporting. All performance
parameters of the DP8110 are programmable and managed through Digital Power Manager via the industry-
standard I2C communication bus and can be changed by a user at any time during product development and
operation. Telemetry data is available in real time and can be accessed over the I²C bus.
BCD.00262 Rev. 1.0, 12 FEB 2013
www.power-one.com
Page 1 of 34