1 / 3
FEATURES
• OUTPUT CURRENT UP TO 10A
• SMALL SIZE AND LOW PROFILE :
1.30” X 0.53” X 0.30” (SMD) ; 2.00” X 0.50” X 0.28” (SIP)
• HIGH EFFICIENCY - 95% @ 3.3V FULL LOAD
• INPUT RANGE FROM 2.4VDC TO 5.5VDC
• FIXED SWITCHING FREQUENCY (300KHZ)
• SMD & SIP PACKAGES
• OUTPUT VOLTAGE PROGRAMMABLE FROM 0.75VDC TO 3.3VDC
VIA EXTERNAL RESISTOR
• INPUT UNDER-VOLTAGE LOCKOUT
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
Telecom/Datacom
OPTIONS
Positive Logic Remote on/off
Industry Control System
Distributed Power Architectures
Semiconductor Equipment
Microprocessor Power Applications
DESCRIPTION
DOS10-05T (SMD type), DOH10-05T (for Vertical Mounting SIP type) and
DOH10-05TA (for Horizontal Mounting SIP type) are non-isolated DC/DC
converters that can deliver up to 10A of output current with full load efficiency of
95% at 3.3V output.
T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output current
10A max.
± 2%Vo(set)
0%
Input voltage range
Vo(set) < Vin – 0.5V
2.4 – 5.5VDC
10A
Voltage accuracy
Minimum load
Full load and Vin(nom.)
Maximum input current Vin=2.4 to 5.5V; Io=Io(max.)
Input filter (Note 5)
C filter
Vin=Vo(set)+0.5V to Vin(max.)
at Full Load
Line regulation
Load regulation
± 0.3%Vo(set),typ.
± 0.4%Vo(set),typ.
Vo(set) =0.75Vdc
Vo(set) =3.3Vdc
Start-up voltage
Shutdown voltage
Input no load current
(Vin=5V, Io=0, module enabled)
100mA,typ.
130mA,typ.
No Load to Full Load
2.2V,typ.
2.0V,typ.
Input under voltage lockout
Input reflected ripple
15mVrms,max.
50mVp-p,max.
Ripple and noise (Note2) 20MHz bandwidth
Temperature coefficient
5~20MHz, 1μH source impedance
100mAp-p
±0.4%, typ.
current
ΔIo /Δt = 2.5A/μS ,Vin(nom.)
Peak deviation 200mV,typ.
Setting time
ENVIRONMENTAL SPECIFICATIONS
Dynamic load
Load change step
response
Operating ambient temperature
Storage temperature range
Thermal shock
–40ºC ~ +85ºC(with derating)
–55ºC ~ +125ºC
(50% to 100% or
(Note 2)
(Vo<10%peak
deviation)
25μS,typ.
100% to 50% of Io(max.))
ΔIo /Δt = 2.5A/μS ,Vin(nom.)
Peak deviation 100mV,typ.
Setting time
(Vo<10%peak 100μS,typ. Over temperature protection
Dynamic load
MIL-STD-810F
Load change step
response
(50% to 100% or
(Note 3)
125ºC,typ.
100% to 50% of Io(max.)
Output current limit
deviation)
FEATURE SPECIFICATIONS
200%,typ.
Remote ON/OFF(Note 6)
(Negative logic)(standard)
Output short-circuit current
Hiccup, automatics recovery
ON = 0V < Vr < 0.3V
OFF =1.5V < Vr < Vin(max) IIN=1mA,max.
ON = Vin(max)
OFF=0V < Vr < 0.3V
IIN=10μA,max.
ESR≧1mΩ
External load capacitance
1000μF,max.
5000μF,max.
ESR≧10mΩ
(Positive logic)(option)
IIN=10μA,max.
IIN=1mA,max.
10μA~1.0mA
Output voltage overshoot-startup Vin=2.4~5.5V, F.L.
Voltage adjustability (see fig.1) (Note 4)
1%Vo(set)
Input current of Remote control pin
0.7525V ~ 3.63V
Remote off state input current
Nominal Vin
1.5mA,typ.
0.5V,max.
GENERAL SPECIFICATIONS
Remote sense range
Efficiency
See table
None
Rise time
Time for Vo to rise from 10% to 90%of Vo(set)
Case 1 (Note7)
6ms,max.
Isolation voltage
Switching frequency
1ms,typ.
1ms,typ.
300KHz, typ.
Turn-on delay time
Case 2 (Note8)
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1
SMD
SIP
1.30 X 0.53 X 0.30 Inch
(33.0 X 13.5 X 7.7 mm)
2.00 X 0.50 X 0.28 Inch
(50.8 X 12.7 X 7.2 mm)
Dimensions
Weight
6.0g(0.22oz)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
1.428 x 107 hrs
MTBF (Note 1)
1.007 x 106 hrs