FEATURES
• OUTPUT CURRENT UP TO 6A
• SMALL SIZE AND LOW PROFILE :
0.80” X 0.45” X 0.25” (SMD) ; 0.90” X 0.40” X 0.24” (SIP)
• HIGH EFFICIENCY - 89% @ 3.3V FULL LOAD
• INPUT RANGE FROM 8.3VDC TO 14.0VDC
• FIXED SWITCHING FREQUENCY (300KHZ)
• SMD & SIP PACKAGES
• OUTPUT VOLTAGE PROGRAMMABLE FROM 0.75VDC TO 5.0VDC
VIA EXTERNAL RESISTOR
• INPUT UNDER-VOLTAGE LOCKOUT
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
Telecom/Datacom
OPTIONS
Positive Logic Remote on/off
Industry Control System
Distributed Power Architectures
Semiconductor Equipment
Microprocessor Power Applications
DESCRIPTION
DOS06-12T (SMD type), DOH06-12T (for Vertical Mounting SIP type) and
DOH06-12TA (for Horizontal Mounting SIP type) are non-isolated DC/DC
converters that can deliver up to 6A of output current with full load efficiency of 89%
at 3.3V output.
T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output current
6A max
Vo(set) ≦3.63V
Vo(set) >3.63V
8.3 – 14VDC
8.3 – 13.2VDC
Input voltage range
Vin(nom) =12V
Voltage accuracy
Minimum load
Full load and Vin(nom)
± 2%Vo(set)
0% Maximum input current Vin=Vin(min); Io=Io(max)
Input filter (Note 5)
± 0.3%Vo(set),typ
4.5A
Vin=Vin(min) to Vin(max)
at Full Load
C filter
Line regulation
Load regulation
Vo(set) =0.75Vdc
Vo(set) =5.0Vdc
Start-up voltage
Shutdown voltage
Input no load current
17mA,typ
100mA,typ
± 0.4%Vo(set),typ
No Load to Full Load
(Vin=12V, Io=0, module enabled)
20mVrms,max
50mVp-p,max
±0.4%, typ
7.9V,typ
7.8V,typ
Ripple and noise (Note2) 20MHz bandwidth
Input under voltage lockout
Temperature coefficient
Input reflected ripple current 5~20MHz, 1μH source impedance 30mAp-p
ΔIo /Δt = 2.5A/μS ,Vin(nom)
Peak deviation 200mV,typ
Setting time
Dynamic load
Load change step
response
ENVIRONMENTAL SPECIFICATIONS
(50% to 100% or
(Note 2)
(Vo<10%peak
deviation)
25μS,typ
Operating ambient temperature
Storage temperature range
Thermal shock
–40ºC ~ +85ºC(with derating)
–55ºC ~ +125ºC
100% to 50% of Io(max))
ΔIo /Δt = 2.5A/μS ,Vin(nom)
Peak deviation 50mV,typ
Dynamic load
Load change step
response
Setting time
(Vo<10%peak
deviation)
MIL-STD-810F
(50% to 100% or
(Note 3)
50μS,typ
100% to 50% of Io(max))
Output current limit
Over temperature protection
140ºC,typ
200%,typ
FEATURE SPECIFICATIONS
Output short-circuit current
Hiccup, automatics recovery
Remote ON/OFF(Note 6)
ESR≧1mΩ
External load capacitance
1000μF,max
3000μF,max
Negative logic(standard)
Positive logic(option)
ON = 0V < Vr < 0.3V
OFF =2.5V < Vr < Vin(max)
ON = (Vin-4) < Vr < Vin(max)
OFF=0V < Vr < 0.3V
IIN=10μA,max
ESR≧10mΩ
IIN=1mA,max
IIN=10μA,max
IIN=1mA,max
10μA~1.0mA
Vin=Vin(min) to Vin(max);
Output voltage overshoot-startup
Voltage adjustability (see fig.1)
1%Vo(set)
F.L.
(Note 4)
0.7525V ~ 5.0V
Input current of Remote control pin
Remote off state input current
GENERAL SPECIFICATIONS
Nominal Vin
1.2mA,typ
Efficiency
See table
None
Rise time Time for Vo to rise from 10% to 90%of Vo(set )
6ms,max.
Isolation voltage
Switching frequency
Case 1 (Note 7)
Turn-on delay time
3ms,typ
3ms,typ
300KHz, typ
Case 2 (Note 8)
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1
SMD
SIP
0.80 X 0.45 X 0.25 Inch
(20.3 X 11.4 X 6.5 mm)
0.90 X 0.40 X 0.24 Inch
(22.9 X 10.2 X 6.0 mm)
Dimensions
Weight
2.8g(0.1oz)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
1.990 x 107 hrs
3.007 x 106 hrs
MTBF (Note 1)
Page 1 of 3 Issued Date:2007/10/12