Document 179-1
SMT Power Inductors
–
DO3316P Series
• High energy storage and very low resistance
• High inductance values are perfect for EL driver applications.
Designer’s Kit C378 contains 3 of each 20% part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weight 0.92– 1.23 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000 per 13″ reel Plastic tape: 24 mm wide,
0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
1. When ordering, specify tolerance, termination and packaging codes:
DO3316P-105MLD
DCR
SRF
Part
L2 Percent max
typ4 Isat5 Irms6
number1
(µH)
tol3 (Ohms) (MHz) (A) (A)
Tolerance:
M = 20%, K = 10% (Table shows stock tolerances in bold.)
DO3316P-102ML_ 1.0 20
DO3316P-152ML_ 1.5 20
DO3316P-222_L_
DO3316P-332_L_
DO3316P-472_L_
0.009 100
0.010
2.2 20,10 0.012
3.3 20,10 0.015
4.7 20,10 0.018
9.0
8.0
7.0
6.4
5.4
6.8
6.4
6.1
5.4
4.8
Termination: L = RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
90
80
65
45
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
DO3316P-682_L_
6.8 20,10 0.027
38
30
27
19
15
4.6
3.8
3.0
2.3
2.0
4.4
3.9
3.1
2.7
2.1
DO3316P-103_L_ 10
DO3316P-153_L_ 15
DO3316P-223_L_ 22
DO3316P-333_L_ 33
20,10 0.038
20,10 0.046
20,10 0.085
20,10 0.10
2. Tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. Tolerances in bold are stocked for immediate shipment.
DO3316P-473_L_ 47
DO3316P-683_L_ 68
DO3316P-104_L_ 100
DO3316P-154_L_ 150
DO3316P-224_L_ 220
DO3316P-334_L_ 330
DO3316P-474_L_ 470
DO3316P-684_L_ 680
DO3316P-105_L_1000
DO3316P-155_L_1500
20,10 0.14
20,10 0.20
20,10 0.28
20,10 0.40
20,10 0.61
20,10 1.02
20,10 1.27
20,10 2.02
20,10 3.00
20,10 4.49
12
10
9
6
5
1.6
1.4
1.2
1.0
1.8
1.5
1.3
1.0
4. SRF >13 MHz measured using Agilent/HP 8753D network analyzer;
<13 MHz using Agilent/HP 4192A.
5. DC current at which inductance drops 10% (typ) from its value without
current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.80 0.80
4.5 0.60 0.60
3.5 0.50 0.50
2.5 0.40 0.40
2.0 0.30 0.30
1.7 0.29 0.27
DO3316P-335_L_3300
20,10 8.97
1.1 0.19 0.17
Document 179-1 Revised 09/25/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.