5秒后页面跳转
DO3314-333ML PDF预览

DO3314-333ML

更新时间: 2024-11-12 06:54:19
品牌 Logo 应用领域
线艺 - COILCRAFT /
页数 文件大小 规格书
2页 199K
描述
SMT Power Inductors

DO3314-333ML 数据手册

 浏览型号DO3314-333ML的Datasheet PDF文件第2页 
Document 295 -1  
SMT Power Inductors - DO3314 Series  
• Only 3.3 mm square, 1.4 mm high!  
• Handles current up to 1.7 Amps rms  
Designer’s Kit C358 contains 3 each of all values  
Core material Ferrite  
Core and winding loss See www.coilcraft.com/coreloss  
Terminations RoHS compliant silver-palladium-platinum-glass frit.  
Other terminations available at additional cost.  
Weight 45.9 – 50.2 mg  
Ambient temperature –40°C to +85°C with Irms current, +85°C to  
+125°C with derated current  
Storage temperature Component: –40°C to +125°C.  
Packaging: –40°C to +80°C  
Resistance to soldering heat Max three 40 second reflows at  
+260°C, parts cooled to room temperature between cycles  
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /  
85% relative humidity)  
Failures in Time (FIT) / Mean Time Between Failures (MTBF)  
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332  
Packaging 1000/7reel; 3500/13reel Plastic tape: 12 mm wide,  
0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth  
PCB washing Only pure water or alcohol recommended  
L2  
DCR3 SRF4  
max typ  
±20%  
Isat5 Irms6  
(A) (A)  
Part number1  
(µH) (Ohms) (MHz)  
1. When ordering, please specify termination and packaging codes:  
DO3314-333MLC  
Termination: L = RoHS compliant silver-palladium-platinum-glass frit  
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or  
S = non-RoHS tin-lead (63/37).  
DO3314-102ML_  
DO3314-152ML_  
DO3314-222ML_  
DO3314-332ML_  
DO3314-472ML_  
DO3314-682ML_  
DO3314-822ML_  
DO3314-103ML_  
DO3314-153ML_  
DO3314-223ML_  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
8.2  
10  
0.11  
0.14  
0.20  
0.26  
0.32  
0.44  
0.47  
0.52  
0.86  
1.20  
160  
140  
90  
80  
60  
45  
45  
40  
30  
20  
2.10 1.70  
2.00 1.40  
1.60 1.30  
1.40 1.20  
1.20 1.10  
0.92 0.80  
0.90 0.75  
0.80 0.75  
0.68 0.65  
0.56 0.50  
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic  
tape (1000 parts per full reel).  
B = Less than full reel. In tape, but not machine ready.  
To have a leader and trailer added ($25 charge), use  
code letter C instead.  
15  
22  
33  
D = 13machine-ready reel. EIA-481 embossed plastic  
tape (3500 parts per full reel).  
2. Inductance tested at 100 kHz, 0.1 Vrms.  
3. DCR measured on a micro-ohmmeter.  
DO3314-333ML_  
1.62  
15  
0.51 0.40  
4. SRF measured using Agilent/HP 4191A or equivalent.  
5. DC current at which the inductance drops 10% (typ) from its value  
without current.  
6. Current that causes a 40°C temperature rise from 25°C ambient.  
7. Electrical specifications at 25°C.  
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.  
Specifications subject to change without notice.  
Please check our website for latest information.  
Document295-1 Revised10/08/08  
© Coilcraft, Inc. 2009  

与DO3314-333ML相关器件

型号 品牌 获取价格 描述 数据表
DO3314-333MLB COILCRAFT

获取价格

SMT Power Inductors - DO3314
DO3314-333MLC COILCRAFT

获取价格

SMT Power Inductors - DO3314
DO3314-333MLD COILCRAFT

获取价格

SMT Power Inductors - DO3314
DO3314-333MTD COILCRAFT

获取价格

General Purpose Inductor, 33uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, ROHS COMPLIANT
DO3314-333MXC COILCRAFT

获取价格

General Purpose Inductor, 33uH, 20%, 1 Element, SMD, ROHS COMPLIANT
DO3314-472 COILCRAFT

获取价格

Low Profile Surface Mount Power Inductors
DO3314-472ML COILCRAFT

获取价格

SMT Power Inductors
DO3314-472MLB COILCRAFT

获取价格

SMT Power Inductors - DO3314
DO3314-472MLC COILCRAFT

获取价格

SMT Power Inductors - DO3314
DO3314-472MLD COILCRAFT

获取价格

SMT Power Inductors - DO3314