®
®
www.datel.com
DMS-20PC Se rie s
3½ Digit, LED Display
Low-Cost, Subminiature
Digital Panel Voltmeters
Actual Size
DMS-20PC Series, 3½ Digit, LED Display, Digital Panel Voltmeters combine a
Features
precision A/D converter; a factory-trimmed, highly stable, voltage reference; and a
large (0.37"/9.4mm), easy-to-read LED display in a single package that is only
slightly larger than the display itself. Displays are offered in either red, orange,
amber, yellow or green colors. High-intensity and low-power (35mW total) red LED's
are also optional.
•
•
Lowest-cost LED meters
Subminiature size:
1.38" x 0.88" x 0.48"
35mm x 22mm x 12mm
•
•
•
Large (0.37"/9.4mm) LED display
Choice of 5 LED colors
These low-cost meters are fully self-contained and fully functional. Their
subminiature (1.38" x 0.88" x 0.48"), epoxy-encapsulated cases incorporate built-in
color filters and bezels; are moisture and vibration proof; and function well in the
harshest environments. Their 12-pin, dual-in-line configuration offers component-like,
plug-in convenience and maximum versatility. Operating temperature range is 0 to
+60°C.
The meters come with one of four, differential, input voltage ranges: ±200mV, ±2V
±20V or ±200V. Input impedance is a minimum 800kΩ. CMRR is typically 86dB (dc
to 60Hz), and CMV is ±2V. Input overvoltage protection (on the non-inverting input)
is ±250V. Devices are fully calibrated at the factory to an accuracy of ±1 count
(±0.05% of full scale range) and never require calibration or adjustment.
A DISPLAY ENABLE function permits the display to be disabled for "power-
down" operation. All models have a DISPLAY TEST function. Standard red LED
models offer an optional DISPLAY HOLD function.
High-intensity or low-power (7mA) red
LED's optional
•
Epoxy-encapsulated, 12-pin DIP package
with built-in color filter and bezel
•
•
•
•
•
4 differential input voltage ranges
Factory calibrated, ±1 count accuracy
Single +5V power supply
User-selectable decimal point placement
DISPLAY ENABLE function for
"power-down" mode
Small size, low cost and adjustment-free reliability make the DMS-20PC Series
the best choice for all your 3½ digit, LED, DPM applications.
•
•
DISPLAYTEST and HOLD (optional)
functions
0 to +60°C temperature range
+5V
1
12
V+
+5V SUPPLY
(–) INPUT LO
1
2
R2
0.01
µF
–5V
2
R1
11
10
DC/DC
CONVERTER
DISPLAY
ENABLE
(+) INPUT HI
V–
909k
»
+2.0V
3
A/D
CONVERTER
ANALOG
COMMON
5V RETURN
0 Vdc
DATA
3
9
8
7
4
5
6
DISPLAY
DP 3
DP 2
DP 1
TEST/HOLD
+5V
REFERENCE OUT
REFERENCE IN
1
2
3
R2 is not used on ±200mV (-0) models or ±2V (-1) models.
R2 = 100k on ±20V (-2) models and 9.1k on ±200V (-3) models.
Only used on ±200mV (-0) and ±2V (-1) models.
Pin 9 is DISPLAY TEST on all but eight models. On those models
(-H option), it is DISPLAY HOLD.
Figure 1. DMS-20PC Series Simplified Schematic
DATEL, Inc., Mansfield, MA 02048 (USA) • Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356
• E-mail:sales@datel.com • Internet: www.datel.com