Datasheet > DM110

DM110

更新时间： 2024-11-26 06:54:11

品牌	Logo	应用领域
EXTECH		/
页数	文件大小	规格书
2页	144K
描述
Pocket Multimeter 4000 Count Autoranging DMM

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

DM110 数据手册

Safety

International Safety Symbols

Specifications

Electrical Specifications

User’s Guide

This symbol, adjacent to another symbol or

terminal, indicates the user must refer to the manual

for further information.

Function

Range

Accuracy

DC Voltage

400.0mV

±(0.7% rdg + 3d)

±(1.0% rdg + 3d)

±(1.3% rdg + 3d)

±(1.0% rdg + 10d)

±(2.3% rdg + 5d)

4.000V, 40.00V,

400.0V,500V

4.000V, 40.00V

400.0V, 500V

40.00mA

This symbol, adjacent to a terminal, indicates that,

under normal use, hazardous voltages may be

present.

Pocket Multimeter

4000 Count Autoranging DMM

Model: DM110

AC Voltage

(40-400Hz)

Double insulation

DC Current

(50-60 Hz)

AC Current

±(2.0% rdg + 5d)

400.0mA

Safety Precautions

Improper use of this meter can cause damage, shock, injury or

death. Read and understand this users manual before

operating the meter.

Make sure any covers or battery doors are properly closed and

secured.

Always disconnect the test leads from any voltage source

before replacing the battery or fuses.

Do not exceed the maximum rated input limits.

Use great care when making measurements if the voltages are

greater than 25VAC rms or 35VDC. These voltages are

considered a shock hazard.

Always discharge capacitors and remove power from the

device under test before performing Capacitance, Diode,

Resistance or Continuity tests.

Remove the battery from the meter if the meter is to be stored

for long periods.

40.00mA

±(2.5% rdg + 10d)

±(2.0% rdg + 5d)

400.0mA

Resistance

400.0Ω, 4.000kΩ,

40.00kΩ, 400.0kΩ

4.000MΩ

40.00MΩ

4.000nF

40.00nF

400.0nF

±(5.0% rdg + 5d)

±(10.0% rdg + 5d)

±(5.0% rdg + 0.3nF)

±(5.0% rdg + 30d)

±(3.0% rdg + 15d)

±(10.0% rdg + 15d)

Capacitance

4.000µF, 40.00µF,

200.0µF

Frequency

Duty Cycle

9.999Hz, 99.99Hz,

999.9Hz, 9.999kHz,

99.99kHz, 999.9kHz,

10MHz

±(2.0% rdg + 5d)

0.1-99%

Warranty

Description

Max input voltage

500V AC/DC

EXTECH INSTRUMENTS CORPORATION warrants this instrument

to be free of defects in parts and workmanship for one year from date

of shipment (a six month limited warranty applies on sensors and

cables). If it should become necessary to return the instrument for

service during or beyond the warranty period, contact the Customer

Service Department at (781) 890-7440 ext. 210 for authorization or

visit our website at www.extech.com for contact information. A Return

Authorization (RA) number must be issued before any product is

returned to Extech. The sender is responsible for shipping charges,

freight, insurance and proper packaging to prevent damage in transit.

This warranty does not apply to defects resulting from action of the

user such as misuse, improper wiring, operation outside of

specification, improper maintenance or repair, or unauthorized

modification. Extech specifically disclaims any implied warranties or

merchantability or fitness for a specific purpose and will not be liable

for any direct, indirect, incidental or consequential damages. Extech's

total liability is limited to repair or replacement of the product. The

warranty set forth above is inclusive and no other warranty, whether

written or oral, is expressed or implied.

Input Sensitivity,

(Frequency Ranges)

Diode Test

10Vrms min. <9.999KHz

40Vrms min. >99.99KHz

Test current 1mA max., open circuit voltage

of 1.5V typical

Meter Description

3 3/4 Digit (4000 count)

RELATIVE button

SELECT button

DATA HOLD button

Hz/DUTY button

Function switch

Rubber holster

Test leads

Continuity Check

Display

Audible signal if the resistance is < 60Ω

4000 count 3 ¾ digit LCD

Over range indication LCD displays “OL”

Polarity

Minus (-) sign for negative polarity.

Low Battery Indication “BAT” symbol indicates low battery

condition.

Battery

CR2032 3V Lithium

Operating Temperature 32^oF to 104^oF (0^oC to 40^oC)

Storage Temperature

Weight

14^oF to 122^oF (-10^oC to 50^oC)

1.7oz (50g)

Size

Standard

4.25x2.2x.5” (108x56x11.5mm)

IEC1010 CAT II 600V Pollution degree II,

CE Approved

including the right of reproduction in whole or in part in any form.

DM110 V2.1 04/06

中文翻译

下载PDF

与DM110相关器件

型号	品牌	获取价格	描述	数据表
DM11151-77-4F	FOXCONN	获取价格	D Subminiature Connector, 9 Contact(s), Female, .109/.109 inch Pitch, Solder Terminal, #4-
DM11151--H1M2-4F	FOXCONN	获取价格	9 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, SOLDER, LEAD FREE
DM11151-H1M2-4F	FOXCONN	获取价格	D Subminiature Connector, 9 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, Plug, L
DM11151-H1M3-4F	FOXCONN	获取价格	D Subminiature Connector, 9 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, #4-40,
DM11151-H476-4F	FOXCONN	获取价格	D Type Connector, 9+9 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, #4-40, Plug
DM11153-76	FOXCONN	获取价格	D Type Connector, 9+9 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, #4-40, Plug
DM11153-76-4F	FOXCONN	获取价格	D Subminiature Connector, 9 Contact(s), Female, Solder Terminal, LEAD FREE
DM11153-H454-4F	FOXCONN	获取价格	D Subminiature Connector, 9 Contact(s), Female-Male, .109/.109 inch Pitch, Solder Terminal
DM11153-H476-4F	FOXCONN	获取价格	D Subminiature Connector, 9 Contact(s), Female-Male, Solder Terminal, LEAD FREE
DM-111A	SONY	获取价格	Magneto-Resistance Element

与DM110相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

44
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

33
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

61
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

58

产品中心

服务支持

精选活动

关于我们

帮助中心

DM110

DM110 数据手册

与DM110相关器件

与DM110相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DM110

DM110 数据手册

与DM110相关器件

与DM110相关文章

您还可以找

您在本页遇到什么问题？