5秒后页面跳转
AH373-WG-B PDF预览

AH373-WG-B

更新时间: 2024-02-07 12:24:01
品牌 Logo 应用领域
美台 - DIODES /
页数 文件大小 规格书
9页 177K
描述
Hall Effect Sensor, -6mT Min, 6mT Max, 0.30-0.40V, Rectangular, Surface Mount, GREEN, SC59-3

AH373-WG-B 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active包装说明:TO-236
Reach Compliance Code:unknown风险等级:5.27
主体宽度:1.6 mm主体高度:1.25 mm
主体长度或直径:3 mm滞后:6 mT
JESD-609代码:e3最大磁场范围:6 mT
最小磁场范围:-6 mT安装特点:SURFACE MOUNT
端子数量:3最大工作电流:4 mA
最高工作温度:125 °C最低工作温度:-40 °C
输出:PASSIVE PULL-UP最大输出电流:25 mA
输出范围:0.30-0.40V输出类型:ANALOG VOLTAGE
封装主体材料:PLASTIC/EPOXY封装等效代码:TO-236
封装形状/形式:RECTANGULAR电源:2.2/20 V
传感器/换能器类型:MAGNETIC FIELD SENSOR,HALL EFFECT子类别:Other Sensors
最大供电电压:20 V最小供电电压:2.2 V
表面贴装:YES端子面层:NOT SPECIFIED
端接类型:SOLDERBase Number Matches:1

AH373-WG-B 数据手册

 浏览型号AH373-WG-B的Datasheet PDF文件第2页浏览型号AH373-WG-B的Datasheet PDF文件第3页浏览型号AH373-WG-B的Datasheet PDF文件第4页浏览型号AH373-WG-B的Datasheet PDF文件第5页浏览型号AH373-WG-B的Datasheet PDF文件第6页浏览型号AH373-WG-B的Datasheet PDF文件第7页 
AH373  
INTERNAL PULL-UP HALL EFFECT LATCH  
Description  
Pin Assignments  
AH373 is a single-digital-output Hall-Effect latch sensor with  
pull-up resistor for high temperature operation. The device  
includes an on-chip Hall voltage generator for magnetic  
(Top View)  
3.  
2.  
OUT  
GND  
sensing, an amplifier to amplify Hall voltage, and  
a
comparator to provide switching hysteresis for noise rejection,  
and an output driver with a pull-up resistor. An internal band-  
gap regulator provides a temperature compensated supply  
voltage for internal circuits and allows a wide operating supply  
range.  
Vdd  
1.  
SIP-3L  
(Top View)  
When the magnetic flux density (B) is larger than operate  
point (Bop), output is switched on (OUT pin is pulled low).  
The output state is held on until a magnetic flux density  
reversal falls below Brp. When B is less than Brp, the output  
is switched off.  
3. OUT  
1. Vdd  
GND 2.  
SC59  
The AH373 is available in SIP-3L and SC59 packages.  
Applications  
Features  
Rotor Position Sensing  
Current Switch  
Encoder  
Bipolar Hall-Effect latch sensor  
2.2V to 20V DC operating voltage  
Built-in pull-up resistor  
25mA output sink current  
Operating temperature: -40°C ~ +125°C  
SIP-3L and SC59 packages  
RPM Detection  
(SC59 is commonly known as SOT23 in Asia)  
Green Molding Compound (No Br, Sb) (Note 1)  
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at  
http://www.diodes.com/products/lead_free.html.  
Typical Application Circuit  
IA  
IB  
Digital Hall Effect Sensor  
M
IC  
Driver  
&
M: Three Phase Hall Motor  
Ia  
Ib  
Ic  
Control Logic  
RPM sensing  
HA  
HB  
HC  
Hall Motor Driver  
3 Phase Hall Motor  
1 of 9  
www.diodes.com  
July 2010  
© Diodes Incorporated  
AH373  
Document number: DS31173 Rev. 6 - 2  

与AH373-WG-B相关器件

型号 品牌 描述 获取价格 数据表
AH373-WL ANACHIP Internal Pull-up Hall Effect Latch

获取价格

AH373-WL-7 DIODES INTERNAL PULL-UP HALL EFFECT LATCH

获取价格

AH373-WLA ANACHIP Internal Pull-up Hall Effect Latch

获取价格

AH373-WL-A DIODES 暂无描述

获取价格

AH373W-PL ANACHIP Internal Pull-up Hall Effect Latch

获取价格

AH373W-PLA ANACHIP Internal Pull-up Hall Effect Latch

获取价格