Rev 1.4
DIO5509/B/C
250mA Single Cell Li-ion Battery Charger
Features
Descriptions
The DIO5509/B/C is a complete constant-current /
constant voltage linear charger for single cell
Lithium-Ion batteries. No external sense resistor is
needed, and no blocking diode is required due to
the internal MOSFET architecture. The charge
voltage is fixed at 4.2V for DIO5509, 4.35V for
DIO5509B and 4.4V for DIO5509C, and the charge
current can be programmed externally with a
single resistor.
Programmable Charge Current Up to 250mA
Over-Temperature Protection
Under Voltage Lockout Protection
Over Voltage Lockout Protection
Reverse current protection between BAT and
GND pins
Automatic Recharge Threshold
DIO5509: 4.05V
DIO5509B: 4.2V
DIO5509C: 4.25V
The DIO5509/B/C automatically terminates the
charge cycle when the charge current drops to
1/10 the programmed value after the final float
voltage is reached.
Final Float Voltage:
DIO5509: 4.2V
DIO5509B: 4.35V
DIO5509C: 4.4V
When the input supply (wall adapter or USB
Charge Status Output Pin
2.5V Trickle Charge Threshold
supply)
is
removed,
the
DIO5509/B/C
automatically enters a low current state, dropping
the battery drain current to less than 0.5µA. The
DIO5509/B/C can be put into shutdown mode,
reducing supply current to 18µA (Typ.).
Applications
Wireless phone
MP3/MP4 Player
Bluetooth device
The DIO5509/B/C is available in a small package
with DFN1*1-6. Standard product is Pb-Free.
Ordering Information
Order Part Number
Top Marking
TA
Package
DIO5509TN6
DIO5509BTN6
DIO5509CTN6
WC
WD
WE
Green
Green
Green
-40 to 85°C
-40 to 85°C
-40 to 85°C
DFN1*1-6
DFN1*1-6
DFN1*1-6
Tape & Reel, 5000
Tape & Reel, 5000
Tape & Reel, 5000
www.dioo.com
© 2021 DIOO MICROCIRCUITS CO., LTD
DIO5509/B/C • Rev. 1.4