Rev 1.6
DIO54056A/B/C
50~800mA, Fully Integrated Linear Charger for 1Cell
Li-ion Battery
Features
Descriptions
36V input standoff voltage
The DIO54056A/B/C is a complete constant-
current / constant voltage linear charger for single
cell Lithium-Ion batteries. No external sense
resistor is needed, and no blocking diode is
required due to the internal MOSFET architecture.
The charge voltage is fixed at 4.4V for DIO54056A
and 4.35V for DIO54056B and 4.2V for DIO54056C,
and the charge current can be programmed
externally with a single resistor.
Programmable Charge Current Up to 0.8A
Over Voltage Lockout Protection
Under Voltage Lockout Protection
Reverse current protection between BAT and
GND pins
Automatic Recharge Threshold
DIO54056A: 4.25V
DIO54056B: 4.2V
DIO54056C: 4.05V
The DIO54056A/B/C automatically terminates the
charge cycle when the charge current drops to
1/10 the programmed value after the final float
voltage is reached.
Final Float Voltage
DIO54056A: 4.4V
DIO54056B: 4.35V
DIO54056C: 4.2V
When the input supply (wall adapter or USB
Charge Status Output Pin
2.6V Trickle Charge Threshold
Battery Temperature Monitoring
Chip Enable Input
supply)
is
removed,
the
DIO54056A/B/C
automatically enters a low current state, dropping
the battery drain current to less than 0.5µA. The
DIO54056A/B/C can be put into shutdown mode,
reducing supply current to 42µA (Typ.).
Soft-Start Limits Inrush Current
DIO54056A/B/C is available in DFN2*2-8 package.
Typical Application
Applications
Wireless phone
MP3/MP4 Player
Bluetooth device
Input
BAT+
VCC
C1
BAT
C2
EN
R1
GPIO/NC
NTC
TEMP
Battery
ISET
R2
STDBY
STAT
RISET
R4
R3
GND
LED1
LED2
www.dioo.com
© 2021 DIOO MICROCIRCUITS CO., LTD
DIO54056A/B/C• Rev. 1.6