DG2591
Vishay Siliconix
www.vishay.com
Audio Jack Detector and Pop Noise Control Switch
DESCRIPTION
FEATURES
The DG2591 is an audio jack detector and pop noise control
switch IC.
• Operates with 1.8 V 5 ꢀ
• Low quiescent current of 2 μA/max.
When there is no ear phone detected, the DG2591 connects
the microphone bias line to ground through the MIC pin. The
DG2591 also gives a logic HIGH signal to the baseband
controller through the OUT pin.
• Integrated sense comparator for audio L of
1.4 V 5 ꢀ threshold
• 1 Ω/max. MIC bias switch provides a quick
discharge and clamping
The DG2591 senses the DC levels at both L_Detect and
GND_Detect. When an ear phone is plugged in, the voltage
at both pins will go low. The DG2591 will indicate the
presence of the ear phone by pulling OUT low and the MIC
switch will turn off.
• (Integrated deglitch circuit)
• ESD Protected
- Human body model > 5 kV
- Charged device model > 1 kV
- IEC 61000-4-2 air discharge > 15 kV
- IEC 61000-4-2 contact discharge > 8 kV
The DG2591 is available ultra small miniQFN6 of
1 mm x 1.2 mm size.
• Ultra compact miniQFN6 of 1 mm x 1.2 mm
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Cellular phones
• Tablet devices
• Portable media players
• Digital cameras
1.8V
V+
R1
10K
To Audio PA Output
To MIC Bias, 2.4V
L_Detect
MIC
RMIC = 2.2K
GND_Detect
R2
OUT
Ear Jack Detection Output
to App Processor
Earphone
SW2
GND
Fig. 1 - Typical Operation Circuit
S14-2036-Rev. B, 13-Oct-14
Document Number: 62887
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000