DG2501, DG2502, DG2503
www.vishay.com
Vishay Siliconix
200 Ω, Low Leakage, Low Parasitic and Low Charge Injection,
Quad SPST Analog Switches
DESCRIPTION
FEATURES
The DG2501, DG2502, and DG2503 are monolithic quad
single-pole single-throw (SPST) analog switches that
operate from a single 1.8 V to 5.5 V power supply.
• 1.8 V to 5.5 V single supply operation
• Low leakage, 1 nA / max. at 85 °C
• Low switch off capacitance
These switches are fully specified at 3 V and 5 V. The parts
feature low parasitic capacitance, low charge injection, and
low leakage performance over the full operating
temperature range of -40 °C to +85 °C. Their ESD/HBM
tolerance is over 8 kV.
• Rail-to-rail signal handling
• Latch up current > 800 mA (JESD78)
• ESD: 8000 V/HBM, 500 V/CDM
• Typical power consumption (< 0.01 μW)
• TTL/CMOS compatible
The DG2501, DG2502, and DG2503 each feature four
independently selectable SPST switches with closely
matched channel resistance. The DG2501 is normally
closed, while the DG2502 is normally open.
• Compact WCSP16 1.44 mm x 1.44 mm
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
The DG2503 has two normally open and two normally
closed
switches.
All
parts
are
guaranteed
break-before-make operation for use in multiplexer
applications. The parts have a guaranteed control logic high
of 1.4 V when V+ is 3 V and 1.8 V when V+ is 5 V.
APPLICATIONS
• Analog front end signal switching
• Sample-and-hold circuits
• Battery-powered systems
• Portable meters
Each switch conducts equally well in both directions when
on, and each has an input signal range that extends to the
supplies.
The DG2501, DG2502, and DG2503 are ideal for portable
healthcare, instrument, and communication devices.
• Automatic test equipment
• Medical and healthcare equipment
• Communication systems
The DG2501, DG2502, and DG2503 are available in wafer
level CSP package with top side lamination.
The package has a 4 x 4 bump array, 0.35 mm pitch, and
1.44 mm x 1.44 mm length and width.
FUNCTIONAL BLOCK DIAGRAM
Switches are shown for a Logic 0 Input
TRUTH TABLE
DG2501
DG2502
DG2503
LOGIC
SWITCH
ON
LOGIC
SWITCH
OFF
LOGIC
SW1, SW4
OFF
SW2, SW3
ON
0
1
0
1
0
1
OFF
ON
ON
OFF
S14-1059-Rev. A, 19-May-14
Document Number: 62962
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000