Applicable standard
Operating temperature range
Contact
-55 C to +105C (Note1)
20% to 80% (Note2)
AWG16
15A
AWG18
13A
AWG 20 AWG 22
Rating
Operating humidity range
1
2
3
Current
11A
10A
8A
9A
8A
7A
Storage temperature range
Storage humidity range
-10 C to +60C (Note3)
40% to 70% (Note3)
DF63-*S-3.96C
AC/DC 630V
14A
12A
12A
10A
Applicable connector
Voltage
1
Rated Voltage
Rated Current
See above
Overvoltage Category
IP-Degree
UL,C-UL
TÜV
600V AC/DC
300V AC/DC
-
-
See above
IP00
Ⅱ
Specifications
Test method
Item
Requirements
QT AT
Construction
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
Electric characteristics
Contact resistance
10 m MAX.
20mV MAX, 1mA (DC or 1000Hz).
-
-
-
X
X
X
Insulation resistance
Voltage proof
500 V DC.
1000 M MIN.
1500 V AC for 1 min.
No flashover or breakdown.
Mechanical characteristics
30 times insertion and extraction.
Mechanical operation
①Contact resistance: 20 mΩ MAX.
②No damage, crack or looseness of parts.
①No electrical discontinuity of 1μs.
②No damage, crack or looseness of parts.
①No electrical discontinuity of 1μs.
②No damage, crack or looseness of parts.
-
-
-
X
X
X
Frequency 10 to 55 Hz, single amplitude
0.75 mm, at 10 cycles for 3 direction.
Vibration
490 m/s2 duration of pulse 11 ms at 3 times each for 3 both
axial directions.
Shock
Environmental characteristics
Damp heat
Exposed at 40 ± 2℃ , 90 to 95 %, 96 h.
①Contact resistance: 20 mΩ MAX.
-
-
X
X
(Steady state)
(After leaving the room temperature for
1-2h.)
②Insulation resistance: 500 M MIN.
③No damage, crack or looseness of parts.
①Contact resistance: 20 mΩ MAX.
Rapid change of temperature Temperature -55℃→ +85℃
Time 30min→ 30min
②Insulation resistance: 1000 M MIN.
③No damage, crack or looseness of parts.
Under 5 cycles.
(The transferring time of the tank is 2 to 3 min)
(After leaving the room temperature for 1 to 2h.)
1) Automatic soldering (Flow)
Soldered at solder temperature
260c for in immersing duration 10s.
2)Manual soldering
Resistance to
soldering heat
No deformation of case of excessive looseness
of the terminals.
X
X
-
-
Soldering iron temperature :300℃
Soldering time :3s
No strength on contact.
Solderability
Remarks
Soldered at solder temperature
245c for in immersing duration 5 s.
A new uniform coating of solder shall cover
minimum of 95 of the surface being immersed.
Note 1: Include the temperature rising by current.
Note 2: No condensing
Note 3: Apply to the condition of long term storage for unused products before mounted on PCB.
After mounted on PCB, operation temperature and humidity range is applied for interim storage during transportation.
Count
Description of revisions
Designed
Checked
Date
1
△
1
DIS-H-00004240
TS.KUMAZAWA
SZ.ONO
20180925
20170915
20170915
20170915
20170915
Approved
Checked
Designed
Drawn
HS.OKAWA
TS.FUKUSHIMA
HT.SATO
Unless otherwise specified, refer to IEC 60512.
MI.SAKIMURA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing no.
ELC-378594-00-00
DF63M-*P-3.96DS
Part no.
Specification sheet
Hirose electric co., ltd.
1
△
1/1
Code no.
CL680-
FORM HD0011-2-1