Applicable standard
Operating
Storage
Temperature range
Storage
Humidity range
Voltage
-55 C to +105C (Note1)
20% to 80% (Note2)
DF63-5S-3.96C
-10 C to +60C (Note3)
Temperature range
Operating
Humidity range
Applicable
Rating
40% to 70% (Note3)
AC/DC
630V
Connector
Current
AWG16:12A AWG18:11A
AWG20:9A
Overvoltage Category
AWG22: 8A
IP-Degree
Rated Voltage
600V AC/DC
300V AC/DC
Rated Current
See above
See above
UL,C-UL
TÜV
-
-
2
2
△
IP00
Ⅱ
Specifications
Item
Test method
Requirements
QT AT
Construction
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Electric characteristics
Contact Resistance
Insulation resistance
Voltage proof
20mV MAX, 1mA(DC or 1000Hz).
500 V DC.
X
X
X
10mΩ MAX.
1000 M MIN.
No flashover or breakdown.
-
-
-
1500 V AC for 1 min.
Mechanical characteristics
Mechanical operation
30 times insertion and extraction.
X
①Contact resistance: 20mΩ MAX.
-
②No damage, crack or looseness of parts.
Vibration
Shock
Frequency 10 to 55 Hz, single amplitude
0.75 mm, at 10 cycles for 3 direction.
490 m/s2 duration of pulse 11 ms at 3 times each for
3 both axial directions.
X
X
①No electrical discontinuity of 1μs.
②No damage, crack or looseness of parts.
-
-
①No electrical discontinuity of 1μs.
②No damage, crack or looseness of parts.
Environmental characteristics
Damp heat
(Steady state)
X
X
Exposed at 40 ± 2℃ , 90 to 95 %, 96 h.
(After leaving the room temperature for 1 to 2h.)
①Contact resistance: 20mΩ MAX.
②Insulation resistance: 500 M MIN.
③No damage, crack or looseness of parts.
①Contact resistance: 20mΩ MAX.
②Insulation resistance: 1000 M MIN.
③No damage, crack or looseness of parts.
-
-
Rapid change of
temperature
Temperature -55℃→ +85℃
Time
30min→ 30min
Under 5 cycles.
(The transferring time of the tank is 2 to 3 min)
(After leaving the room temperature for 1 to 2h.)
1) Automatic soldering (Flow)
Soldered at solder temperature
260℃ for immersing duration 10s.
2) Manual soldering
Resistance to soldering
heat
No deformation of case of excessive
looseness of the terminals.
X
X
-
-
Soldering iron tempreture: 300℃
Soldering time: 3s
No strength on contact.
Solderability
Soldered at solder temperature
245℃ for in immersing duration 5s.
A new uniform coating of solder shall
cover minimum of 95% of the surface
being immersed.
Note 1: Include the temperature rising by current.
Note 2: No condensing
Note3: Apply to the condition of long term storage for unused products before mounted on PCB.
After mounted on PCB board , operating temperature and humidity range is applied for interim storage during transportation.
Count
Description of revisions
Designed
Checked
Date
2
△
18.09.2
0
16.07.13
16.07.13
16.07.12
16.07.12
2
DIS-H-00004228
TS.KUMAZAWA
SZ.ONO
Remarks
Approved
Checked
Designed
Drawn
HS.OKAWA
TS.FUKUSHIMA
YK.YAMAGUCHI
MI.SAKIMURA
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
ELC-365877-00-00
Part No.
DF63-3P-7.92DS
Specification sheet
2
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL680-0559-0-00
△
FORM HD0011-2-1