Applicable standard
Operating
Storage
Temperature range
Storage
Humidity range
Voltage
-40 C to +105C (Note1)
20% to 80% (Note2)
DF62W-*EP-2.2C(##)
-10 C to +60C (Note3)
Temperature range
Operating
Humidity range
Rating
40% to 70% (Note3)
Applicable connector
Applicable cable
AC/DC
250V
Current
1
AWG 20 to 22
AWG 20 : 5A/pin
AWG 22 : 4A/pin
Insulation diameter
φ1.4 to φ1.6mm
Specifications
Test method
Item
Requirements
QT AT
Construction
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
Electric characteristics
Contact resistance
30 m MAX.
-
20mV MAX, 1mA (DC or 1000Hz).
X
Mechanical characteristics
Mechanical operation
30 times insertion and extraction.
1)Contact resistance: 30 mΩ MAX.
2)No damage, crack or looseness of parts.
-
X
Vibration
Shock
Frequency 10 to 55 Hz, single amplitude
0.75 mm, at 10 cycles for 3 direction.
490 m/s2 duration of pulse 11 ms at 3 times each for
3 both axial directions.
1)No electrical discontinuity of 1μs.
2)No damage, crack or looseness of parts.
-
-
X
X
Environmental characteristics
Damp heat
Exposed at 40 ± 2℃ , 90 to 95 %, 96 h.
1)Contact resistance: 30 mΩ MAX.
-
-
X
X
(Steady state)
(After leaving the room temperature for 1 to 2h.)
2)No damage, crack or looseness of parts.
Rapid change of temperature Temperature -55℃→ +85℃
Time 30min→ 30min
Under 5 cycles.
(The transferring time of the tank is 2 to 3 min)
(After leaving the room temperature for 1 to 2h.)
Note 1: Include the temperature rising by current.
Note 2: No condensing.
Note 3: Apply to the packaged and unused product.
1
Count
Description of revisions
Designed
HT.SATO
Checked
Date
1
2
DIS-H-00015722
SZ.ONO
20221017
20150926
20150926
20150926
20150926
△
Remarks
Approved
Checked
Designed
Drawn
KI.AKIYAMA
TS.FUKUSHIMA
YK.YAMAGUCHI
YK.YAMAGUCHI
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
ELC-358672-00-00
DF62W-EP2022PCF
Drawing No.
Part No.
Specification sheet
1
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL0544-1016-1-00
△
FORM HD0011-2-1