Applicable standard
Operating
Storage
temperature range
Storage
humidity range
Voltage
-40 C to +105C (Note1)
20% to 80% (Note2)
DF62#-24S-2.2C(**)
-10 C to +60C (Note3)
temperature range
Operating
Rating
40% to 70% (Note3)
humidity range
Applicable connector
250V AC/DC
UL,
C-UL
Rating
Voltage
Current
Current
AWG #22- 30 : 2.5A/pin
AWG #24-3 0 : 2.0A/pin
AWG #26 to 30 : 1.0A/pin
250V AC/DC
2.5A
1
Operating
temperature range
-35℃~75℃(Note1)
Specifications
Test method
Item
Requirements
QT AT
Construction
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
Electric characteristics
Contact resistance
30 m MAX.
-
-
-
20mV MAX, 1mA (DC or 1000Hz).
X
X
X
Insulation resistance
Voltage proof
500 V DC.
1000 M MIN.
650 V AC for 1 min.
No flashover or breakdown.
Mechanical characteristics
Mechanical operation
30 times insertion and extraction.
①Contact resistance: 30 mΩ MAX.
②No damage, crack or looseness of parts.
①No electrical discontinuity of 1μs.
②No damage, crack or looseness of parts.
①No electrical discontinuity of 1μs.
②No damage, crack or looseness of parts.
-
-
-
X
X
X
Vibration
Frequency 10 to 55 Hz, single amplitude
0.75 mm, at 10 cycles for 3 direction.
Shock
490 m/s2 duration of pulse 11 ms at 3 times each for 3 both
axial directions.
Environmental characteristics
Damp heat
Exposed at 40 ± 2℃ , 90 to 95 %, 96 h.
①Contact resistance: 30 mΩ MAX.
②Insulation resistance: 1000 M MIN.
③No damage, crack or looseness of parts.
①Contact resistance: 30 mΩ MAX.
②Insulation resistance: 1000 M MIN.
③No damage, crack or looseness of parts.
-
-
X
X
(Steady state)
(After leaving the room temperature for 1-2h.)
Rapid change of temperature Temperature -55℃→ +85℃
Time 30min→ 30min
Under 5 cycles.
(The transferring time of the tank is 2-3 min)
(After leaving the room temperature for 1-2h.)
1)Solder bath method
Soldered at solder temperature,
260c for in immersion , duration, 10 s.
2)Manual soldering
Resistance to
Soldering heat
No deformation of case of excessive looseness of
the terminals.
X
X
-
-
Soldering iron temperature :300℃,
Soldering time :3s.
No strength on contact.
Solderability
Remarks
Soldered at solder temperature,
245c for in immersion , duration, 5 s.
A new uniform coating of solder shall cover
minimum of 95 of the surface being immersed.
Note 1: Include the temperature rising by current.
Note 2: No condensing.
Note 3: Apply to unused product on packaged condition.
Count
Description of revisions
Designed
RI.GENDA
Checked
Date
1
△
1
DIS-H-00019309
SZ.ONO
20231023
20211026
20211025
20211025
20211025
Approved
Checked
Designed
Drawn
SJ.OKAMURA
SZ.ONO
SS.YAMASAKI
SS.YAMASAKI
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing no.
ELC-362876-01-00
DF62-24P-2.2DSA(01)
Part no.
Specification sheet
1
1/1
Hirose electric co., ltd.
Code no.
CL0544-0584-0-01
△
FORM HD0011-2-1