Applicable standard
Operating Temperature Range
-55 to +85C (Note1)
20% to 80% (Note2)
50 V AC/DC
Storage Temperature Range
Storage Humidity Range
Applicable Connector
-10 C to +60C (Note3)
40% to 70% (Note3)
DF53-8P-0.6C(##)
Rating
Operating Humidity Range
Voltage
All pin
AWG 32 : 0.7A
Current
Any of 2 pins as a power
AWG 32 : 1.3A(power), 0.5A(signal)
Specifications
Test method
Item
Requirements
QT AT
Construction
General Examination
Marking
X
X
X
X
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
Electric Characteristics
Contact Resistance
X
20 m MAX.
20mV MAX, 1mA (DC or 1000Hz).
-
X
X
-
-
Insulation Resistance
Voltage Proof
100 V DC.
100 M MIN.
200 V AC for 1 min.
No flashover or breakdown.
Mechanical Characteristics
Mechanical Operation
20 times insertion and extraction.
1.Contact resistance: 40 m MAX.
2.No damage, crack or looseness of parts.
1.Mating Force : 16.7N MAX.
X
X
X
-
-
-
Mating and unmating
force
It takes out and inserts with a conformity connector.
2.Unmating Force : 2.6N MIN.
Vibration
Frequency 10 to 55 Hz, single amplitude 0.75 mm, at
10 cycles for 3 direction.
1.No electrical discontinuity of 1μs.
2.No damage, crack or looseness of parts.
Acceleration 500 m/s2 duration of pulse 11 ms at 3
X
-
Shock
times for 3 directions.
Environmental Characteristics
Damp Heat
1.Contact resistance: 40 m MAX.
2.Insulation resistance: 100 M MIN.
3.No damage, crack or looseness of parts.
1.Contact resistance: 40 m MAX.
2.Insulation resistance: 100 M MIN.
3.No damage, crack or looseness of parts.
X
X
Exposed at 40 ± 2C , humidity 90 to 95 %, 96 h.
-
-
(Steady State)
(After leaving the room temperature for 1 to 2h.)
Rapid Change Of
Temperature
Temperature -55C→ +85C
Time
30min→ 30min
Under 5 Cycles.
(The transferring time of the tank is 2 to 3 MIN)
(After leaving the room temperature for 1 to 2h.)
Exposed at 85±2C, 96h
Dry Heat
Cold
1.Contact resistance: 40 m MAX.
2.Insulation resistance: 100 M MIN.
3.No damage, crack or looseness of parts.
1.Contact resistance: 40 m MAX.
2.Insulation resistance: 100 M MIN.
3.No damage, crack or looseness of parts.
X
X
-
-
Exposed at -55±3C, 96h
Remarks
Note 1: Include the temperature rising by current.
Note 2: No condensing
Note 3: Applicable to unused product packaging.
CHECKED
DATE
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
0
△
0
20230407
20230407
20230407
20230407
APPROVED
CHECKED
DESIGNED
DRAWN
SJ.OKAMURA
SJ.OKAMURA
JN.TONAI
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
SPECIFICATION SHEET
JN.TONAI
ELC-380623-00-00
DF53-8S-0.6H
DRAWING NO.
PART NO.
CODE NO.
1/2
HIROSE ELECTRIC CO., LTD.
CL0668-1006-0-00
0
△
FORM HD0011-2-1